Operating Instructions, Mode Demploi

4.0 OPERATING INSTRUCTIONS

WARNING: Risk of injection or injury. Do not direct discharge stream at persons.

WARNING

4.1START-UP PROCEDURE

1.Make sure water supply is connected and turned on.

2.Make sure the unit is plugged in and the GFCI HAS BEEN RESET.

3.Release gun safety if locked. (Fig. 3)

4.0 MODE D'EMPLOI

ATTENTION : Risque d'absorption et de blessures. Ne pas diriger le jet vers les

ATTENTION personnes.

4.1MISE EN MARCHE

1.Assurez-vous que l’alimentation d’eau est branchée et ouverte.

2.S’assurer que l’unité est branchée et que le disjoncteur de fuite à la terre A ÉTÉ RÉENCLENCHÉ.

3.Désengager le cran de sûreté si nécessaire. (Fig. 3)

Fig. 3
A.	Safety lock “locked”	A.	Cran de sûreté « engagé »
B.	Safety lock “unlocked”	B.	Cran de sûreté « désengagé »

4.To allow air to escape from the hose, squeeze trigger on the gun until there is a steady stream of water.

5.Remove any dirt or foreign matter from the gun outlet and the male connector of the wand.

6.Insert the required wand into the gun’s quick connect coupling by pushing firmly and twisting wand ¼ of a turn to lock into place. (Fig. 4)

NOTE: Make sure wand is locked.

4.Afin de permettre à l’air de s’échapper par le tuyau, appuyer sur la gâchette du pistolet jusqu’à ce qu’un jet d’eau continu sorte du gicleur.

5.Eliminer la saleté ou tout corps étranger de la sortie du pistolet et du raccord mâle de la lance.

6.Insérer la lance désirée dans le raccord rapide du pistolet en poussant fermement et en tournant la lance d’un quart de tour pour la fixer en place. (Fig. 4)

REMARQUE : Assurez-vous que la lance est bloquée.

Fig. 4

1750 PSL specifications

The Husky 1750 PSL is a high-performance injection molding machine that caters to the needs of various industries, including automotive, consumer goods, and medical applications. Known for its reliability and superior precision, the Husky 1750 PSL is engineered to deliver consistent results, ensuring that manufacturers achieve their production targets efficiently.

One of the standout features of the Husky 1750 PSL is its robust clamping system. The machine utilizes a patented hydraulic design that provides exceptional clamping force, which is essential for maintaining part quality during the molding process. This ensures that the molded components have tight tolerances and are free from defects, critical for industries requiring high precision.

The injection unit of the Husky 1750 PSL is designed for high-speed performance, allowing for rapid cycle times without compromising on quality. This is made possible through advanced injection technologies that optimize melt flow and pressure. The machine can handle a variety of materials, from standard thermoplastics to specialized resins, making it versatile for different applications.

An important aspect of the Husky 1750 PSL is its user-friendly interface. The advanced control system features a touchscreen display that allows operators to monitor and adjust machine parameters easily. Real-time data analytics enable predictive maintenance, reducing downtime, and enhancing productivity. This is particularly beneficial in high-demand manufacturing environments where efficiency is key.

Energy efficiency is another significant characteristic of the Husky 1750 PSL. The machine is designed to minimize energy consumption while maximizing output. Its integrated design reduces the overall footprint of the system, making it suitable for facilities with space constraints. Additionally, the machine is optimized for low noise operation, contributing to a better working environment.

Durability and reliability are inherent to Husky’s design principles. The components used in the Husky 1750 PSL are built to withstand the rigors of continuous operation, ensuring a longer lifespan and lower maintenance costs. Companies investing in this machine benefit from reduced operating expenses over time.

In conclusion, the Husky 1750 PSL epitomizes innovation in the field of injection molding technology. With its combination of precision, efficiency, and user-friendly features, it provides manufacturers with the tools they need to succeed in a competitive landscape. This machine not only enhances production capabilities but also supports sustainability initiatives through its energy-efficient design.