WORKING WITH DETERGENTS
Detergents can only be applied at low pressure (Min.).
"STEP 1:
Install the vario power spray wand. Set the spray wand to the low pres- sure setting (Min.).
"STEP 2:
Fill a container with Kärcher deter- gent. Place the filter end of detergent suction tube into the container.
" STEP 3: |
Turn on the pressure washer (I). Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply de- tergent to work area. Do not allow detergent to dry on surface.
"STEP 4:
Always draw fresh water through the detergent suction tube when done, to rinse/flush any remaining deter- gents from the injection system.
For best results see Cleaning Tips for specific information on how to clean different surfaces.
Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a long- er life. For Kärcher Detergents, check your retailer or visit our website:
The following Kärcher detergents are available:
One Gallon ready to use
!All Purpose & Vehicle Cleaner
!Deck Wash
!Heavy Duty Degreaser
!House Wash
CAUTION
Never use:
–Bleach, Chlorine products and other corrosive chemicals
–Liquids containing solvents (i.e., paint thinners, gasoline, oils)
–
–Ammonia products
–
These chemicals will harm the unit and will damage the surface being cleaned.
English 9