Working with Detergent

Detergents can only be applied at low pressure (-).

Step 1 Install the Vario spray wand and set the Vario spray wand to the low pressure setting (-) by turning the wand collar. The wand must be set in the low pressure

(-) position to apply detergents.

Step 2 Adjust the filter end of the detergent tube for light (-), or maximum (+) detergent coverage.

For best results see Cleaning Tips on pages 8 & 9 for specific informa- tion on how to clean

different surfaces.

Always Use Kärcher

Detergents for Best Results.

Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer.

The special formula won’t clog the suction 6 tube filter and will protect the internal parts

of the pressure washer for a longer life. For Kärcher Detergents, check your retailer or call:

In USA Call:

1-800-537-4129

or visit our website:

www.karcher-usa.com

The following Kärcher detergents

Step 3 Fill a container with Karcher detergent. Place the filter end of detergent suction tube into the container.

Step 4 With the engine running, pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

are available:
• Vehicle Wash	• House Wash
• Degreaser	• Deck Wash

•All Purpose Cleaner

Caution: Never use:

•Bleach, Chlorine products and other corrosive chemicals

•Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

•Tri-sodium phosphate products

•Ammonia products

•Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.