Visual Inspection, Cleaning the fuel Tank

HDS 2000 Super

6. Care and maintenance

6.2Visual Inspection

•Checking the connector cable

The connector cable must not be damaged (risk of electricution). A damaged connector cable must be replaced immediately by an authorized Customer Service/qualified elec- trician.

•When the oil has completely drained, screw the oil drain plug back in and slowly pour in oil up to the “MAX” position on the oil tank (air bubbles must escape).

•See technical data, chapter 3 for quantity and type of oil.

•Check the high-pressure hose

The high-pressure hose must not be damaged (risk of bursting). A damaged high-pressure hose must be replaced immediately.

6.3Cleaning the fuel Tank

•Remove the tank from the appliance (first unscrew the handle, appliance hood and cover from the switch box).

•Dispose of the remaining fuel.

•Rinse out the tank thoroughly. If you rinse out the tank with water, allow it to dry completely.

•Replace the fuel filter.

6.4Pump leaks

•3 drops per minute are permissible. You should contact customer service if the leakage is more rapid.

6.5Changing the oil

•If the oil is milky (water in the oil), contact customer service immediately.

•Unscrew the oil drain plug and dispose of the old oil via an authorized collecting point (protection of the environment).

6.6Cleaning the Strainer Upstream of the Low-water Safety Device

•Unscrew the high-pressure hose from the pump head at the safety block.

•Rotate an M8 screw into the strainer hole and use it to pull the strainer out.

6.7Protection from frost

•Frost will damage the appliance if it is not drained completely of water. In winter the appliance should be kept in a room which is above freezing point. Otherwise, it is recommended to drain the appliance or rinse it thoroughly with anti-freeze.

•Draining the appliance

–Unscrew the water intake hose and high- pressure hose from the appliance.

–Unscrew the supply line from the base of the boiler and allow the heating element to drain.

–Allow the appliance to run for a max. of 1 minute until the pump and the lines have drained.

•Anti-freeze

During extended down-time periods, it is recommended to pump an anti-freeze through the appliance. This also protects the appliance to a certain degree from corrosion.

•Observe the following if the unit is connected to a flue:

Danger of damage caused by cold air entering through the flue. Disconnect unit from flue at outside temperatures below 0°C.

HDS 2000 specifications

The Kärcher HDS 2000 is a high-pressure hot water cleaner designed for professional applications, particularly suitable for the rigorous demands of industrial cleaning. Engineered for efficiency and durability, the HDS 2000 stands out in its class with a blend of features and advanced technologies that enhance its performance and usability.

One of the standout features of the Kärcher HDS 2000 is its robust heating system. This machine is equipped with a powerful heating coil, allowing it to reach operating temperatures of up to 155 degrees Celsius. The hot water capability not only enhances cleaning effectiveness but also ensures the removal of tough grease and grime in a fraction of the time compared to cold water cleaners. The system utilizes an eco-friendly heating method, minimizing energy consumption while maintaining performance.

The HDS 2000 also incorporates Kärcher's innovative Eco!efficiency mode, which optimizes fuel consumption and reduces emissions without sacrificing cleaning power. This feature makes the machine particularly appealing to environmentally conscious users and industries striving to comply with strict environmental regulations.

Moreover, the HDS 2000 is designed for user comfort and ease of operation. It comes with a user-friendly control panel that allows operators to adjust pressure and temperature settings quickly. The ergonomic handle and lightweight design facilitate maneuverability, making it easier for users to transport and operate the machine in various settings.

The machine is built for durability, featuring a rugged construction that can withstand heavy use in challenging environments. It is equipped with a high-quality detergent injection system that enables the use of specialized cleaning agents, enhancing overall efficiency in different cleaning scenarios.

Another important characteristic of the Kärcher HDS 2000 is its versatility. It can be used for a wide range of applications, including vehicle cleaning, equipment maintenance, and building facades. The variety of accessories available enhances its ability to tackle various cleaning tasks, making it a valuable asset for businesses across multiple industries.

In summary, the Kärcher HDS 2000 is a standout hot water high-pressure cleaner, combining advanced heating technology, user-friendly features, and robust construction. Its efficient design and versatile capabilities make it an essential tool for professional cleaning operations, ensuring both effective results and a commitment to sustainability.