Karcher HDS 2000 manual Connecting the water, Intended use, Connecting the power

Page 8

HDS 2000 Super

4. Start-up

GB

4.7Connecting the water

•See technical data, chap. 3 for connected loads.

•Attach the supply hose to the appliance and to the water line. The supply hose is not included in standard delivery.

•If you draw in the water from an open tank, you should

–disconnect the water supply from the pump head

4.9Intended use

•Use the appliance to clean machines, vehicles, buildings, tools, etc.

•Clean facades, patios, garden implements, etc. with the high-pressure spray only, i.e. without detergent. We recommend the dirt blaster, a special accessory, for stubborn dirt.

•If the machine is used at petrol stations or in other hazardous areas, the appropriate safety regulations must be observed.

–unscrew the upper supply hose from the water tank and connect to the pump head.

–use a water supply hose which has a minimum diameter of 3/4" and a suction filter.

•Until the pump has drawn in the water, you should:

–rotate the pressure and volume control to “MAX”,

–close the detergent metering valve.

•Please ensure waste water containing mineral oil

does not contaminate soil, lakes and rivers or the sewerage system. Therefore, please wash engines and underbodies only in appropriate washing installations provided with oil traps.

4.8Connecting the power

•See technical data, chap. 3 for connected loads.

•The voltage stated on the rating plate must correspond to the voltage of the power source.

•First, position the appliance switch to “STOP” and then put the electric plug into the socket.

•If the motor rotates in the wrong direction, the electronic control circuit will switch the motor off after a few seconds. The INCORRECT MOTOR ROTATION warning light illuminates.

Disconnect the power input plug. This plug is equipped with a device for reversing polarity. Apply a screwdriver at the prescribed point, press it inwards and rotate both terminals through 180°.

Attach the power input plug again.

•If you are using an extension lead, it should always be completely unwound from the cable drum and have an adequate cross-section.

Mains voltage

10 m

30 m

230 V

6 mm²

10 mm²

400 V

4 mm²

6 mm²

21

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HDS 2000 Super Deutsch Page Diagram of the appliance HDS 2000 SuperFlow-path schematic Technical Data Power connectionStart-up Intended use Connecting the waterConnecting the power Operation Operating with steam Operating with detergentOperating with two handguns Manual detergent controlSwitching off the appliance Interrupting operationCare and maintenance Service warning light is illuminatedCleaning the fuel Tank Visual InspectionPump leaks Changing the oilTroubleshooting Fault warning light is illuminatedIndicator lights Appliance does not come up to pressureDetergent is not being drawn Burner does not igniteSafety equipment AccessoriesGuarantee General Information

HDS 2000 specifications

The Kärcher HDS 2000 is a high-pressure hot water cleaner designed for professional applications, particularly suitable for the rigorous demands of industrial cleaning. Engineered for efficiency and durability, the HDS 2000 stands out in its class with a blend of features and advanced technologies that enhance its performance and usability.

One of the standout features of the Kärcher HDS 2000 is its robust heating system. This machine is equipped with a powerful heating coil, allowing it to reach operating temperatures of up to 155 degrees Celsius. The hot water capability not only enhances cleaning effectiveness but also ensures the removal of tough grease and grime in a fraction of the time compared to cold water cleaners. The system utilizes an eco-friendly heating method, minimizing energy consumption while maintaining performance.

The HDS 2000 also incorporates Kärcher's innovative Eco!efficiency mode, which optimizes fuel consumption and reduces emissions without sacrificing cleaning power. This feature makes the machine particularly appealing to environmentally conscious users and industries striving to comply with strict environmental regulations.

Moreover, the HDS 2000 is designed for user comfort and ease of operation. It comes with a user-friendly control panel that allows operators to adjust pressure and temperature settings quickly. The ergonomic handle and lightweight design facilitate maneuverability, making it easier for users to transport and operate the machine in various settings.

The machine is built for durability, featuring a rugged construction that can withstand heavy use in challenging environments. It is equipped with a high-quality detergent injection system that enables the use of specialized cleaning agents, enhancing overall efficiency in different cleaning scenarios.

Another important characteristic of the Kärcher HDS 2000 is its versatility. It can be used for a wide range of applications, including vehicle cleaning, equipment maintenance, and building facades. The variety of accessories available enhances its ability to tackle various cleaning tasks, making it a valuable asset for businesses across multiple industries.

In summary, the Kärcher HDS 2000 is a standout hot water high-pressure cleaner, combining advanced heating technology, user-friendly features, and robust construction. Its efficient design and versatile capabilities make it an essential tool for professional cleaning operations, ensuring both effective results and a commitment to sustainability.
Top Page Image Contents