WORKING WITH DETERGENTS
Detergents can only be applied at low pressure.
Step 1
Install the Wash brush or Quattro nozzle. Turn Quattro Nozzle to Low pressure position. Rotate the spray lance in the direction of “
” until reaching the stop.
Note: No detergent in
Step 2
Fill detergent tank with Kärcher detergent.
Step 3
Turn on the pressure washer. Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area, from bottom to top. Do not allow detergent to dry on surface.
For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.
Always Use Kärcher Detergents for Best Results.
Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. Special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher Detergents, check your retailer or call:
The following Kärcher detergents are available:
•Pressure Wash
•Deck Wash
•Degreaser
•Touchless Vehicle Wash
7
Caution
Never use:
•Bleach, chlorine products and other corrosive chemicals
•Liquids containing solvents (i.e., paint thinners, gasoline, oils)
•
•Ammonia products
•
These chemicals will harm the unit and will damage the surface being cleaned.