Karcher K 5000 G specifications Operating Instructions

Page 5

OPERATING INSTRUCTIONS

Step 1 Connect the high pressure hose to the unit’s high pressure outlet.

Step 2 Insert the Vario spray wand into the gun. Push in and turn clock- wise to lock spray wand in place.

Step 3 Connect garden hose to unit’s water inlet.

Step 4 Connect garden hose to the cold water source and turn water on completely.

Step 5 Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 6 Slide the throttle control to the fast position. Turn the choke control to the “CHOKE” position (only if the engine is cool). After starting, move the choke to “RUN”.

Step 7 Pull the starter handle. If the engine fails to start after 3 pulls squeeze the trigger gun to release pressure, and repeat step 7.

Image 5

Contents High Pressure Washer Operator Manual Never Model K 5000 G OverviewWater Supply Cold Water Only Safety WarningsNo tools required Assembly InstructionsOperating Instructions Vario spray wand Using the AccessoriesFollowing Karcher detergents are available Working with DetergentDetergents can only be applied at low pressure Remove Step Shutting Down & CLEAN-UPWinterizing and LONG-TERM Storage Deck Cleaning Cleaning TipsCement Patios Brick and Stone With or without detergentBarbecue Grills, Outdoor Power Equipment Gardening Tools Optional Cleaning AccessoriesPatio & Lawn Furniture RecommendationsSymptom Cause Solution Engine will not TroubleshootingStart High pressureGarden hose Symptom Cause Solution No detergentConnection leaks Spray wand leaks