Karcher K 5000 G specifications Assembly Instructions, No tools required

Page 4

ASSEMBLY INSTRUCTIONS

No tools required.

Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolt, and tighten with knob.

Step 3 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.

Step 2 Check oil level. Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)

Important! Do not run the engine with a high or low oil level as this can

cause engine damage. If you have fur- ther questions regarding the engine, please refer to the engine’s operating manual included with the unit.

You are now ready to operate your Karcher 5000 G Pressure Washer.

Image 4

Contents High Pressure Washer Operator Manual Model K 5000 G Overview NeverSafety Warnings Water Supply Cold Water OnlyAssembly Instructions No tools requiredOperating Instructions Using the Accessories Vario spray wandDetergents can only be applied at low pressure Working with DetergentFollowing Karcher detergents are available Winterizing and LONG-TERM Storage Shutting Down & CLEAN-UPRemove Step Cleaning Tips Deck CleaningCement Patios Brick and Stone With or without detergentOptional Cleaning Accessories Barbecue Grills, Outdoor Power Equipment Gardening ToolsPatio & Lawn Furniture RecommendationsTroubleshooting Symptom Cause Solution Engine will notStart High pressureSymptom Cause Solution No detergent Garden hoseConnection leaks Spray wand leaks