Compaq 4115 CPU Cover and Keyboard Assembly, 32 Removing the Screws from the Bottom of the CPU

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CAUTION: Installing the processor board without completing the recommended disassembly can flex the system board. This could cause an incomplete connection or damage to the system board.

After the CPU cover has been removed (Section 5.5.6), place the processor board in position and squeeze it into place. Complete the assembly process by reversing the steps described in Section 5.5.6.

5.5.6 CPU Cover and Keyboard Assembly

To remove the CPU cover and keyboard assembly, complete the following steps:

1.Disconnect the AC power and any external devices (Section 5.3.1).

2.Undock the computer from the auxiliary base, if necessary (Section 5.3.2).

3.Remove all battery packs (Section 5.3.3).

4.Remove the pointing device (Section 5.3.5).

5.Remove the hard drive (Section 5.3.6).

6.Remove two screws from the bottom left side of the CPU.

Figure 5-32 Removing the Screws from the Bottom of the CPU

Removal and Replacement Procedures 5-35