Compaq 4120T, 4130T, 4150T, 4140T, 4131T, 4200, 4125T, 4160T SLIMLINE, 4125D, 4115, 4110D manual Handle

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4.3Handle

This section describes the removal and replacement of the handle. To remove the handle, complete the following steps:

To attach the handle to the computer, follow these steps:

1.If a charged battery is installed in the DualBay, initiate Suspend. (If not, initiate Hibernation by pressing Fn+ suspend.) Close the computer, detach external devices, then turn the computer bottom side up.

2.Line up the metal tabs on the handle with the slots on the back of the computer.

3.Attach the handle to the computer.

Figure 5-20. Attaching the Handle to the Computer

5-22 Removal and Replacement Procedures