Compaq 4160T SLIMLINE, 4130T, 4150T DualBay Eject Assembly, Removal and Replacement Procedures

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.9.3DualBay Eject Assembly

To remove the DualBay eject assembly components, complete the following procedures:

1.Disconnect the AC power and any external devices (Section 5.3.1).

2.Undock the computer from the auxiliary base, if necessary (Section 5.3.2).

3.Remove all the battery packs (Section 5.4.3).

4.Remove the pointing device (Section 5.3.5).

5.Remove the hard drive. (Section 5.3.6).

6.Remove the CPU base cover (Section 5.5.4).

7.Remove the processor shield and the processor (Section 5.5.5).

8.Remove the CPU cover/keyboard assembly (Section 5.5.6).

9.Remove the display assembly (Section 5.6).

10.Remove the clutch cover (Section 5.7.1).

11.Remove the clutches (Section 5.7.2)

12.Remove the system board (Section 5.8.1).

5-60 Removal and Replacement Procedures