Compaq 4131T, 4130T, 4150T, 4140T, 4200, 4125T, 4160T SLIMLINE 24. Removing the Memory Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.5.1Memory Cover

The memory cover must be removed before either the memory boards or the Lithium clock battery can be removed. To remove the memory cover, complete the following steps:

1.Disconnect the AC power and any external devices (Section 5.3.1).

2.Undock the computer from the auxiliary base, if necessary (Section 5.3.2).

3.Remove all battery packs (Section 5.3.3).

4.Unsnap the door by pulling up on the wide end of the door. The case utility tool may be used if needed.

Figure 5-24. Removing the Memory Cover

Reverse the procedure to install the memory cover.

Removal and Replacement Procedures 5-27