Compaq 4131T, 4130T Power Cord Set Requirements, Conductor Power Cord Set, General Requirements

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix B

Power Cord Set Requirements

3-Conductor Power Cord Set

The wide range input feature of your computer permits it to operate from any line voltage from 90 to 264 volts AC.

The power cord set received with the computer meets the requirements for use in the country where you purchased the equipment.

Power cord sets for use in other countries must meet the requirements of the country where you use the computer.

General Requirements

The requirements listed below are applicable to all countries:

1.The length of the power cord set must be at least 6.00 feet (1.8 m) and a maximum of 9.75 feet (3.0 m).

2.All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used.

3.The power cord set must have a minimum current capacity of 2.5A and a nominal voltage rating of 125 or 250 volts AC, as required by each country’s power system.

4.The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C5 connector, for mating with appliance inlet on the AC Adapter.

Power Cord Set Requirements B-1