Compaq 4160T, 4130T, 4150T, 4140T CPU Base Cover, 28. Removing the Four Screws from the CPU Base

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.5.4CPU Base Cover

To remove the CPU base cover, complete the following steps:

1.Disconnect the AC power and any external devices (Section 5.3.1).

2.Undock the computer from the auxiliary base, if necessary (Section 5.3.2).

3.Remove all battery packs (Section 5.3.3).

4.Remove the handle (Section 5.4.3), if attached.

5.Using a Torx T-8 screwdriver, remove the two screws from the bottom and the two lower screws from the rear of the CPU base.

Figure 5-28. Removing the Four Screws from the CPU Base

Removal and Replacement Procedures 5-31