Arrow Plastic EH86S, WL86-A, VL8662-A, LM86, EH86-A Door Track Assembly, Using the door track splice

Step 4	● Parts Needed For ●
	Door Track Assembly
B17

●6617 Door Track Splice (1)

●9378 Door Track (2)

The door track assembly supports the sliding doors and reinforces the front wall. It is made up of three pieces.

NOTE:

Door Track Splice (painted part)

1 Using the door track splice,

(painted), join the door track (galvanized) pieces end-to-end as shown.

2 Insert four screws from the under-

side only.

Hint: The holes in the top side of the door track assembly are for fastening the gable to the top of the front wall in a later step.

6617

9378

STEP STEP

1 2

6617

66769

9378

Long Leg on Top

Short Leg

on Bottom

9378

3 Position door slides onto the

legs, from the end of door track assembly, as shown in the end view.

4 Set this piece aside for later use.

66769

END VIEW

9378

945/8"

2,40m

STEP STEP

3 4

945/8"

2,40m

94 5/8" 2,40m 17