|
|
| ● Door Track Assembly (1) |
|
| Step 7 | ● Parts Needed For ● | ● Rear Wall Angle Assembly (1) |
|
| Frames | ● 8476 Side Wall Angle (2) |
| |
| ● Rear Wall Channel Assembly (1) |
| ||
| B20 |
| ● 9920 Side Wall Channel (2) |
|
|
|
|
|
|
|
|
|
|
|
The main frame pieces give rigidity to the side walls and provide a surface for attaching the gables which sup- port the roof.
1 Fasten the rear wall angle as-
sembly across the inside top of the rear wall using screws.
2 Fasten the rear wall channel as-
sembly across the middle of the rear wall using screws.
Wall Angles
Must Face
Inside
Building
STEP |
| STEP |
|
|
|
1 |
| 2 |
|
|
|
| 8476 | |
6615
9924
FRONT
3 Fasten the side wall angles across the inside top of the side panels us- ing screws. Side wall angles must overlap rear wall angle in corners.
4 Fasten the side wall channels
across the middle of the side panels using screws. Fasten overlaps in rear corners with screws.
STEP
3
STEP
4
9920
FRONT
5 Fasten the door track assembly
(holes on top) across the top of the front wall panels using screws. See the figure.
9378
DOOR TRACK ASSEMBLY
FRONT
Long Leg on Top
Opening
Facing in
Short Leg on Bottom
STEP
5
20
