Manuals / Arrow Plastic / Lawn and Garden / Outdoor Storage

Arrow Plastic LM86, WL86-A, VL8662-A, EH86S Roof Beam Assembly, Place the side wall angle, back

Models: ML86-A SA8662-A EH86-A EH86S LM86 VL8662-A WL86-A

1 32

Download 32 pages 55.21 Kb

Page 16

Step 3	● Parts Needed For ●
Step 3	Roof Beam Assembly
B16

●8474 Roof Beam (1)

●8476 Side Wall Angle (1)

The roof beams join the two gables and support the roof panels. The main roof beam is made up of two pieces fastened together.

1 Place the side wall angle, back-

to-back, with a roof beam and fasten together using ten screws.

2 Set this piece aside for later use.

Assembled

8476 Side Wall Angle

STEP

1

8474 Roof Beam

Main Roof Beam

16

Image 16

Arrow Plastic LM86, WL86-A, VL8662-A, EH86S, EH86-A, SA8662-A, ML86-A Roof Beam Assembly, Place the side wall angle, back

Contents

EH86S Before YOU Begin Plan Ahead Required Eye Goggles No Phillips Screwdriver Safety First Care & Maintenance Other Tips Accessories Roof Strengthening heavy snow load Kits This WAS Left Blank Intentionally This WAS Left Blank Intentionally Foundation For Your Building Foundation97 1/2 47m Anchoring Anchoring Down The Building Hardware Parts List Assembly by Key No Step Floor Frame AssembliesPlace the front floor frames as Overlap the rear floor frames as Frame Assemblies Overlap the rear wall channel Roof Beam Assembly Place the side wall angle, back Door Track Assembly Using the door track splice Floor Frame Position the rear corner panels at CornersPosition a front corner panel at Fasten the door track assembly FramesFasten the rear wall angle as Fasten the rear wall channel as Wall Panels Door Jamb Gable Assemblies Gables/Braces Join the left and right gables Roof Beams Right Roof Panel If a Roof Beef-Up Kit was RoofAssembly Front Ridge Cap Roof Trim Door Assembly Hold the vertical door bracePut a horizontal door brace onto Attach the lower door guides Door Installation & Adjustment Repeat steps 1 through 3 for Left door LM86 ML86-A SA8662-A VL8662-A EH86-AWL86-A