Step 2 | ● Parts Needed For ● |
Frame Assemblies | |
B15 |
|
●6615 Rear Wall Angle (2)
●9924 Rear Wall Channel (2)
The main frame pieces reinforce the walls. These pieces will later be in- stalled in the center and at the top edge of the rear wall. Proceed as follows:
1 Overlap the rear wall channel
9924
Rear Wall Channel
94 5/8" 2,40m
9924
pieces as shown in the figure and fasten the two pieces together with one bolt in the center hole (three holes will align).
2 Overlap the rear wall angle pieces
as shown in the figure and fasten them together with one bolt in the center hole.
3 Set the assemblies aside. You will
use them later.
STEP
1
Rear Wall Angle 94 5/8" 2,40m
6615
6615
STEP
2
Rear Wall Channel
94 5/8" 2,40m
Rear Wall Angle 94 5/8" 2,40m
STEP
3
15
