Andrew manual ES45T-T Reflector Assembly Step

ES45T-T Reflector Assembly

Step 12

Step 13

Step 14

Hoist reflector/backstructure assembly to vertical position until upper joints of main trian- gle assembly contact pipe and straddle two locator bars on support and elevation assembly (P/N 49635) as shown in Figure 75.

Figure 75

Install two U-bolts at each pivot bracket of main triangle assembly.

•Use 1/2 inch (13 mm) lockwashers and nuts.

•Securely tighten U-bolts allowing for some reflector movement

Raise lower portion of reflector/backstructure assembly and attach remaining end of ele- vation strut to elevation axis bracket of main triangle assembly.

•Use 3/4 x 4-1/2 in (114 mm) bolt, lockwasher and nut

•Mechanical means or fine adjustment assembly may be utilized to achieve elevation angles greater than 300.

62 Installation Procedures