Andrew manual ES45T-R Reflector Assembly Step

ES45T-R Reflector Assembly

Step 4

Step 5

Raise segments and hold while loosely attaching mounting ring hub (P/N 49965) to con- vex side of center opening.

•Use ¼-20 capscrews, lockwashers and nuts

•Insert capscrews from concave side of reflector segments

Loosely attach reflector segments A-Band D-Eto diameter setting bands (P/N 49426) with edge joining plates (P/N 49424) and capscrew hardware as shown in Figure 23.

•Use ¼-20 capscrews, lockwashers and nuts

•Insert capscrews from concave side of reflector segments

Figure 23

24 Installation Procedures