Andrew manual Step Step Step, ES45T-RReflector Assembly, Installation Procedures

Step 12

Step 13

Step 14

ES45T-R Reflector Assembly

Install last reflector panel (C-D) by loosely attaching to diameter setting bands and mounting ring hub. Loosely attach panel seam hardware as installer inside moves reflector segment to enable segment union.

Loosely attach retaining bar (P/N 49997) to mounting ring hub (P/N 202429). Loosely attach center plate (P/N 49964-2) to concave side of reflector.

•Insert capscrew hardware from plate (concave side of reflector) to retaining bar

Insert shim (P/N 200215) between each reflector segment around perimeter of reflector assembly. Refer to Figure 28B. Tighten setting band and joining plate hardware (P/N 49693).

Refer to

Figure 31

Panel

Seams (6)

Temporary

Supports (6)

Figure 29

	Steel Rule
	0.03-0.06 Inch
Line of Sight
	Increment
(0.0° Elevation)
	(0.5-1.0 mm)

Theodolite,

Transit or

Laser LevelReflector Turn Back

Approx. 10 Feet (3 m)

Pointed Measuring Rod

6’ (1.8 m)

Reflector

Diameter Setting Band

Shim Stack - Not
		Temporary Support
Shown for Clarity
	12 Inch (300 mm)

Figure 30

28 Installation Procedures