Andrew manual ES45T-R Reflector Assembly Step

ES45T-R Reflector Assembly

Step 2

Step 3

Loosely attach tee plates (P/N 202447) to points B, F and D on convex side of reflector as shown in Figure 35.

•Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12).

•Insert bolts from concave side of reflector

Figure 35

Loosely attach plates (P/N 49427) to points A, C and E on convex side of reflector. Loosely attach two support angles (P/N 49438) to each of six plates as shown in Figure 36.

•Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)

•Install bolts from concave side of reflector

•Angles should be installed with flat side towards back side of reflector

Figure 36

33 Installation Procedures