Andrew manual ES45T-TReflector Assembly, Step Step, Installation Procedures

ES45T-T Reflector Assembly

Step 3

Step 4

Note: All six reflector segments are identified individually by a two letter designation (A- B, D-E, etc). Locate the markings on the reflector segments in order to assemble the reflector in the proper sequence. See Figure 55.

Figure 55

Place reflector segment A-B between two setting bands with concave side down as shown in Figure 56. Place reflector segment D-Eopposite panel A-B.

Figure 56

Raise segments and hold while loosely attaching mounting ring hub (P/N 202429) to convex side of center opening.

•Use ¼-20 capscrews. lockwashers and nuts

•Insert capscrews from concave side of reflector segments

47 Installation Procedures