Andrew manual ES45T-R Reflector Assembly Step

ES45T-R Reflector Assembly

Step 4

Step 5

Loosely attach support angles (P/N 49436) to three tee plates (P/N 202447) as shown in Figure 37.

•Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)

•Install bolts from concave side of reflector

•Angles should be installed with edge in and flat side away from reflector as shown.

Figure 37

Loosely attach support angles (P/N 49438) from plates E and A to angle (P/N 49436) from tee plate F with pivot bracket (P/N 300758) as illustrated in Figure 38.

Figure 38

34 Installation Procedures