Andrew ES45T manual Step

Step 16

Step 17

Step 18

Step 19

Connect U-bracket (P/N 49704) to appropriate connection plate.

•Use A-325 ½ x 1-½ in. bolts, flatwashers and nuts. (see page 12)

Figure 18

Determine required length of azimuth strut to nearest degree increment of desired azimuth setting as specified in the Elevation and Azimuth Adjustments Section. Adjust azimuth setting by withdrawing secondary strut to achieve necessary length. Install four ½ in. set screws and securely tighten as demonstrated in Figure 19.

Figure 19

Connect one end of azimuth strut (P/N 49767) to connection plate with U-bracket (P/N 49704) as indicated in Figure 18.

•Use ¾ x 4-½ in. bolts, lockwashers and nuts

Securely tighten all A-325 ground mount hardware except the fine adjustment hardware per A-325 tensioning procedure (see page 12).

The tripod ground mount assembly is now completed with the necessary operational essentials. All ground mount options have separate instructional bulletins located in the parts kit that contain the option.The next step in the installation process is the reflector assembly. Proceed to the appropriate section for the type of reflector you are installing.

21 Installation Procedures