ASSEMBLY
STEP 1
First choose a suitable location to assemble your
To begin - place the Burner Assembly upside down in the work area. Insert the Leg Assemblies over the tabs on the Burner Assembly as shown below. Be sure the angle of the Leg Assemblies face outward as shown. Be sure that the tabs of the Windshield are fully inserted into the Leg Assemblies. Secure each Leg Assembly with one Wing Screw. Tighten securely.
Leg Assembly (X 3)
Wing Screw (X 3)
Windshield Tab
(insert into Leg)
Burner Assembly
(Shown upside down)
Page 13