Step 6 | ● Parts Needed For ● |
Corners | |
P19 |
|
●9381 Front Corner Panel (2)
●9385 Rear Corner Panel (2)
NOTE
The remainder of the building assembly requires many hours and more than one person. Do not continue beyond this point if you do not have enough time to com- plete the assembly today. A partially assembled building can be severely damaged by light winds.
Each screw and bolt in the wall re- quires a washer.
1 Position the rear corner panels at
the rear corners, as shown. The wid- est part of each rear corner panel must be placed along the rear of the building. Attach the corner panels to the floor frame with four screws.
2 Position a front corner panel at
the corner of the floor frame as shown. The widest part of each front corner panel must be placed along the front of the building. A small gap will exist between front corner panel and ramp. Fasten the corner panel to the floor frame with three screws.
| Wide | |
| Side | |
| 9385 | |
| Narrow Side | |
STEP | REAR | |
1 | ||
9385 |
SIDE | TOP VIEW | SIDE |
|
|
STEP
2
9381 | 9381 |
FRONT
NOTE
Be careful to install the correct panel in each position as shown
3
the wall panels, before proceeding.
The floor frame must be square and level or holes will not align.
STEP | 9385 |
3
9381
Panels rest on frame as shown
9385
9381
Washer
19
