| Step 1 | ● Parts Needed For ● | ● 8941 Ramp (1) |
|
| ● 9379 Front Floor Frame (2) |
| ||
| Floor Frame Assemblies |
| ||
| ● 9377 Rear Floor Frame (2) |
| ||
| B14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
The front floor frame is made up of three pieces. The rear floor frame is made up of two pieces. The holes in these pieces will align when the pieces are positioned with correct amount of overlap. The illustrations below show the proper overall length for the front and rear. Proceed as follows:
1 Place the front floor frames as
shown. Center the ramp, with drain holes facing outside, on top of the two front floor frames. Join the frames by inserting eight screws.
2 Overlap the rear floor frames as
shown. The holes in these pieces will align when the pieces are posi- tioned with correct amount of over- lap. See the illustrations below for the proper overall length of the rear floor frame. Join the frames by insert- ing five bolts into frame set as shown.
3 Double check the length of each and set these pieces aside for later use.
14
9379
8941
9379
|
|
|
| 9377 |
|
|
|
|
|
|
|
|
| ||
|
|
|
| Front Floor | |||
|
| STEP | 8941 | ||||
|
| Frame Assembly | |||||
|
| 1 | |||||
|
|
| 95 7/8" | 2,43m | |||
|
|
|
|
|
|
|
|
|
| 9379 | 9379 |
|
|
| |
|
|
| DRAIN HOLES FACE |
|
|
|
|
|
|
| OUTSIDE |
|
|
|
|
|
|
|
|
|
|
|
|
STEP
2
Rear Floor Frame
95 7/8" 2,43m
93779377
95 7/8" 2,43m Rear
STEP
3
95 7/8" 2,43m Front
