Operation

Scope of delivery

The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking.

In the event of missing accessories or any transport damage, please contact your dealer.

Description of the Appliance

Illustrations on fold-out page! 1 Coupling element for water

connection

2Water connection with integrated sieve

3Appliance switch "0/OFF“/ „I/ON“

4High pressure hose

5Dosage regulator for detergent

6Storage for trigger gun

7High-pressure hose drum

8Transport handle

9Hand crank for hose drum

10Storage of detergent reservoir with de- tergent connection

11Storage for accessories

12Storage hook for mains connection ca- ble

13Mains cable with mains plug

14Detergent reservoir with locking lid

15Wheels

16Trigger gun

17Lock trigger gun

18Key to detach the high pressure hose from the trigger gun

19Spray lance with pressure regulation (Vario Power)

20Spray lance with Dirtblaster

Special accessories

Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion.

Before Startup

Mount loose parts delivered with appliance prior to start-up.

Install wheels

Illustration

Push the wheels into the intake and se- cure with the enclosed plugs, watch for positioning of plug.

Install the storage for hand-spray gun

Illustration

Place the bottom holder into the recess- es and push forward until it audibly locks in.

Insert the top holder and push down all the way.

Install the storage hook for the mains connection cable

Illustration

Press in the storage hook and lock it into the top position.

Install the transport handle

You will need the 2 included screws as well as a Philips screwdriver PH 2.

Illustration

Slide the transport handle into the guide and secure it with 2 screws.

Install the dosage regulator for detergent

You will need the 2 included screws as well as a Philips screwdriver PH 2.

Illustration

Insert both detergent hoses onto the hose fittings.

Install the dosage regulator and con- nect using 2 screws.

Note: During installation you must make sure that the tongues of the dos- age regulator match up with the intend- ed recesses in the casing.

– 9