Karcher G 2500 LH manual Assembly Instructions, Step

ASSEMBLY INSTRUCTIONS

ÎSTEP 1:

Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs.

ÎSTEP 2:

Fasten the rubber grommets in the nozzle holder.

ÎSTEP 3:

Mount the nozzle holder and the gun/hose storage handle.

ÎSTEP 5:

Attach the wand to the spray gun.

ÎSTEP 6:

Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle.

ÎSTEP 7:

Release the collar and push the noz- zle until the collar clicks.

Î STEP 4: ￿ WARNING

Place the quick connect nozzles in	High pressure in nozzle area.
the nozzle holder.
	Risk of injury caused by improperly
	locked nozzle.
	„ Make sure you hear a ‘click’ when in-
	serting the nozzle tip into the wand.
	„ Pull the nozzle to make sure it is
	seated properly before operating
	your unit.

6English