ÎSTEP 8:
Attach the high pressure hose to the spray gun.
OPERATING INSTRUCTIONS
CAUTION
Do not run the engine with a high or low oil level as this can cause engine dam- age.
If you have further questions regarding the engine, please refer to the engine manual included with the unit.
ÎSTEP 1:
Check oil level. Oil level should al- ways be between the “FULL” and “ADD” marks on the dipstick.
Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for sea- sonal grades.).
We recommend that the oil be changed after the first 5 hours of use, then once every 50 hours.
ÎSTEP 2:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
ÎSTEP 3:
Connect the high pressure hose to the unit’s high pressure outlet.
ÎSTEP 4:
Connect garden hose to unit’s water inlet.
ÎSTEP 5:
Connect garden hose to the cold wa- ter source and turn water on com- pletely.
Do not use hot water.
ÎSTEP 6:
Unlock the Safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Open fuel valve.
Pull the choke rod to the ON position (on a warm engine, leave the choke rod in the OFF position).
ÎSTEP 8:
Move the engine stop switch to the ON position.
For engine details see engine manu- al.
ÎSTEP 9:
Pull the starter handle.
If the engine fails to start after
3 pulls, squeeze the trigger gun to release pressure, and repeat step. After the engine warms up enough to run smoothly, move choke rod to OFF position.
English 7