Operation
CAUTION
Pressure washer is equipped with a thermal relief valve. If pressure washer is operated without spraying for an extended period (approximately 10 minutes) the valve will expel hot water.
Do not operate pressure washer with inlet water screen removed. Keep screen clean. Screen keeps abrasive sediment out of pump, Abrasive sediment can clog pump or damage cylinders.
Do not pump caustic materials; such materials may corrode pump components.
9.See the chemical injector or sandblaster kit manu- al for detailed cleaning information if these acces- sories are used.
Trigger Safety Latch
WARNING
To reduce risk of serious bodily injury, including fluid injection, splashing in eyes or on skin, always engage trigger safety latch when spraying is stopped, even for a moment. In engaged position, trigger safety latch prevents gun from being trig- gered accidentally by hand or if dropped or bumped. Be sure to push down latch fully to en- gage it. If latch not fully engaged, gun can acciden- tally trigger. See Figures 2a and 2b.
04612
TRIGGER SAFETY LATCH SHOWN ENGAGED
Figure 2a
04612
TRIGGER SAFETY LATCH SHOWN
DISENGAGED
Figure 2b
308532 7