ACDelco PN 09301 A manual Shut Down Instructions, Things to Check Daily, Things to Check Weekly

Page 8

SHUT DOWN INSTRUCTIONS

1.If the burner is on turn control switch to position 1(pump).

2.Run water through the pump until cool water flows from the cleaning gun. Failure to do this could result in increased coil scaling.

3.Turn the control switch to off.

4.Turn off the water supply.

5.If the machine will be exposed to freezing temperatures, see winterizing procedure.

THINGS TO CHECK DAILY

1.Check oil level in pump.

2.Fill fuel tank at the end of each day’s use to prevent condensation build-up in fuel system.

3.Fill soap container.

4.Check oil level in engine.

THINGS TO CHECK WEEKLY

1.Check and clean water float tank and pump inlet screen.

2.Check all hoses for leaks and damage. Repair or replace as needed.

3.Check pressure nozzle for wear. Replace if needed.

4.Check all nuts and bolts. Tighten as needed (DO NOT OVER TIGHTEN.)

5.Check all water connections for leaks. Tighten if loose.

6.Check belts and pulleys for wear and tightness. (DO NOT CHECK WHILE MACHINE IS RUNNING.)

Manual

Page 8

Image 8
Contents King Brute Limited Warranty Limited Warranty Important Safety Precautions DO’SHOT Installation LocationFuel Supply Venting the UnitsOperating Instructions Operating the MachinePRE-OPERATING Instructions Things to Check Weekly Shut Down InstructionsThings to Check Daily OIL Burners Maintenance of ComponentsPumps Winterizing DE-SOOTING Coil DE-LIMING or DE-SCALING of CoilDiagnosis and Maintenance Problem Probable Cause SolutionManual PUM0015 PPA0015 Unloader Burner Beckett 12V Component Locator & Parts List Electrical Schematic 12VDC Gunvalve and Hose Assembly Component Locator Gunvalve and Hose Assembly Component Locator Parts List GC 590-40 Gunvalve Component Locator GC 590-40 Gunvalve Component Locator Parts List