Spray washer, Turbo nozzle, «º¿½» ±º¬¸» ¿¬»ò

• Spray washer

The water is discharged in a wide fan for cleaning walls, motorbikes and automobiles, etc.

The entire nozzle can be rotated by approximately 90 degrees to change the shape of the spray between horizontal and vertical.

NOTE

Set the spray adjustment to “Jet” ﬁrst of all, and then gradually move it to the “Spray” position while pulling the trigger.

Note that there is a chance of the water being sprayed horizontally over a wide area if this is rotated fully to the “Spray” position.

Note that the nozzle may be damaged if it is forced to move past the stop position when alternating between “Jet” and “Spray”.

Turbo nozzle

The turbo nozzle rotates as it sprays high-pressure jets of water for ecient washing.

NOTE

The turbo nozzle only discharges powerful jets of water when set at the “Jet” mode.

Avoid using this on items that are easily broken or for which coatings are easily peeled.

Detergent bottle nozzle (Fig. 11 and 12)

Sprays water mixed with detergent.

Uses neutral detergents available on the open market.

(1) Insert the water feed pipe into the detergent nozzle.

(2) Pour an undiluted neutral detergent into the bottle and then screw the bottle onto the detergent nozzle.

(3) Attaching and removing the detergent bottle nozzle is the same as explained for other nozzles.

When inserting the detergent bottle, make sure that the trigger gun is pointing in the direction shown in the illustration on the right.

(4) Aim the detergent nozzle at the article to be washed and pull the trigger on the trigger gun to spray a mixture of water and detergent at low pressure.

WARNING

Do not use acidic or alkali detergents. Use only neutral detergents available on the open market.

Using detergents other than neutral detergents or chemical agents may result in accidents or malfunctions.

NOTE

Moisten the O-ring with water if it is dicult to insert the nozzle.

USING THE STRAINER HOSE SET (sold separately)

The separately-sold strainer hose set is equipped with a function that will automatically suck water from a water tank, etc., when attached to the AW130.

The maximum height of suction (lifting range) is approximately 0.5 m.

Attach this correctly in accordance with conditions.

English

Í«½¬·±²¸»·¹¸¬©¸»²¬¸»¸»·¹¸¬±º¬¸»©¿¬»® º»»¼ ±«¬´»¬

·- ´±©»® ¬¸¿²¬¸» ³¿¨·³«³ ¸»·¹¸¬±º¬¸» -«½¬·±²¸±-»æ

Ú®±³ ¬¸» ³¿¨·³«³ ¸»·¹¸¬±º¬¸» -«½¬·±² ¸±-» ¬± ¬¸»

-«®º¿½» ±º¬¸» ©¿¬»®ò

Maximum height of the

suction hose

Water surface

Water

feed inlet

Í«½¬·±² ¸»·¹¸¬©¸»² ¬¸» ¸»·¹¸¬±º¬¸» ©¿¬»® º»»¼

±«¬´»¬·- ¬¸» -¿³» ¿- ¬¸» ³¿¨·³«³ ¸»·¹¸¬±º¬¸»

-«½¬·±² ¸±-»æÚ®±³ ¬¸» ©¿¬»® º»»¼ ±«¬´»¬¬± ¬¸» -«®º¿½»

±º¬¸» ©¿¬»®ò

Water feed inlet

(maximum height of the suction hose)

Water surface

1. Attaching the strainer to the suction hose (Fig. 13)

(1) Pass the suction hose through the hose band supplied and then gently moisten the inside of the suction hose with water.

(2) Insert the strainer as far as it will go, and then ﬁrmly tighten the hose band with a ﬂat-headed screwdriver.

2. Attaching the one-touch joint (black) to the suction hose (Fig. 14)

Attach the one-touch joint (black) supplied as a standard accessory to the suction hose.

3. Starting the suction hose water suction process (Fig. 15)

Sink the strainer hose set into a container ﬁlled with water.

Start o the suction process (introduce water to the suction hose.)

NOTE

Do not use anything other than clean water (river or pond water, muddy water containing sand granules.)

Failure to observe this may result in malfunctions. Set the switch at “ON” without the nozzle attached. Failure to observe this may result in dry operations, leading to malfunctions.

4. Insert the one-touch joint into the water feed connector (Fig. 16)

Withdraw the one-touch joint from the accumulated water and insert it into the water feed connector on the washer while making sure that the water inside the hose does not escape.

AW 130 specifications

The Hitachi AW 130 is a versatile, compact wheel loader designed for a variety of construction and material handling tasks. With its impressive combination of power, efficiency, and advanced technology, it has carved out a niche for itself in the competitive market of heavy machinery.

One of the standout features of the Hitachi AW 130 is its powerful engine. Equipped with a high-performance diesel engine, it delivers the horsepower needed to tackle demanding jobs while maintaining fuel efficiency. This balance of power and economy not only enhances productivity but also helps operators save costs on fuel over time.

Another key characteristic of the AW 130 is its compact design. With a relatively small footprint, this wheel loader is perfect for narrow job sites or congested urban environments where space is limited. Its agility allows for easy maneuverability, enabling operators to navigate tight corners and restricted areas with ease. Despite its compact size, the AW 130 still offers a substantial lift capacity, making it a practical choice for a wide range of applications.

The loader is outfitted with advanced hydraulic technology, featuring a state-of-the-art hydraulic system that ensures quick response times and optimal performance. Operators can quickly lift and lower the bucket, making it easier to handle materials efficiently. The hydraulic system also contributes to the overall versatility of the machine, allowing for the attachment of various implements such as forks, buckets, and grapples.

Comfort and ergonomics are also paramount in the design of the Hitachi AW 130. The operator's cabin is spacious and well-insulated, reducing noise levels and providing a comfortable working environment. Controls are intuitively arranged, making it easy for operators to access all essential functions without unnecessary strain. Visibility is enhanced by large windows, providing a clear view of the working area, which is crucial for safety and precision.

In terms of technology, the Hitachi AW 130 incorporates several smart features that make operation more efficient. These include advanced monitoring systems that provide real-time data on machine performance, allowing operators to make informed decisions while working.

In conclusion, the Hitachi AW 130 is a robust wheel loader that combines power, efficiency, and advanced technology in a compact package. Its features, including a powerful engine, advanced hydraulics, and ergonomic design, make it an ideal choice for a wide range of applications in various environments. Whether it's construction, landscaping, or material handling, the AW 130 stands out as a reliable and efficient machine.