Never use items to support the lid.
Use water based solvents only in the Parts Washer. The water based solvent is nonflammable, it has been investigated and tested and can be used safely. It contains no flash point and autoignition temperatures. These solvents have a PH of more than 7.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts and follow instructions in the manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious personal injury, property damage or even death.
IMPORTANT SAFETY INSTRUCTIONS
Before using this tool, you need to become familiar with its operation. If you are unsure about the operation of the tool, or have any questions about its proper use, call the Customer Service Department at
•Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
•Be sure your work area is clean and secure before turning the power switch into the “ON” position. Be sure the area is free from all foreign material, nails, staples, or any other material.
•Turn the Parts Washer “OFF” and unplug from the power source before making any changes or adjustments.
•Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the unit. Never use gasoline, paint thinner, or other caustic chemicals that can damage the unit.
•Always use the appropriate safety gear when operating this parts washer. Including but not limited, to goggles, dust mask or respirator. Always work in a
•Keep hands away from the cutting area.
•Do not reach under the work piece.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
Symbol | Name | Description |
|
V | Volts | Voltage (Potential) |
|
A | Amperes | Current |
|
Hz | Hertz | Frequency (Cycles per Second) |
|
W | Watt | Power |
|
Kg | Kilograms | Weight |
|
| Alternating Current | Type of Current |
|
| Direct Current | Type of Current |
|
| Alternating or Direct Current | Type of Current |
|
| Earthing Terminal | Grounding Terminal |
|
| Class II Construction | Denotes Double Insulation |
|
min | Minutes | Time |
|
s | Seconds | Time |
|
| Diameter | Size of Drill Bits, Grinding Wheels, etc. |
|
| No Load Speed |
| |
|
|
|
|
…/min | Revolutions per Minute | Revolutions, Surface Speed, Strokes, etc. per Minute |
|
1,2,3… | Ring Selector Settings | Speed, Torque or Position Settings |
|
PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions | 6 | ||