Important Safety Rules

COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.

Do not operate the parts washer in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating the parts washer. Distractions can cause you to lose control.

Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is grounded.

Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating the tool outside, use an outdoor extension cord marked “WA” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock. Make sure the extension cord being used is in good condition. If there are any cuts or nicks (no matter how deep) in the insulation, DO NOT use that cord. Also, make sure the extension cord is heavy enough to carry the current needed. DO NOT use small "around-the-house” lamp extension cords. These cords can easily overheat and/or catch fire when used with power tools.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use the parts washer if the power switch does not turn it “ON” or “OFF”. Any tool that

cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool

accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the

hands of untrained users.

PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions

PWASH20 specifications

The Buffalo Tools PWASH20 is a powerful and versatile pressure washer designed to tackle a wide range of cleaning tasks around the home and outdoors. With a robust 2000 PSI output, this electric pressure washer delivers impressive cleaning power, making it an ideal choice for homeowners and DIY enthusiasts alike. Its efficient design promotes ease of use and exceptional performance, ensuring that cleaning chores are completed quickly and effectively.

One of the key features of the Buffalo Tools PWASH20 is its 1.76 GPM flow rate, which allows for a thorough wash on various surfaces without wasting water. The pressure washer is equipped with an electric motor that eliminates the need for gas, providing a quieter and more environmentally friendly alternative to gas-powered models. This also means lower maintenance costs, as there are no oil changes or fuel requirements.

The PWASH20 comes with several quick-connect nozzles, allowing users to easily choose the right spray pattern for different cleaning tasks. The included nozzles provide options for low-pressure fan spray, high-pressure rinse, and everything in between, ensuring flexibility for a variety of surfaces, including patios, decks, vehicles, driveways, and more. This adaptability makes it suitable for both tough grime removal and gentler applications.

Another significant characteristic of the Buffalo Tools PWASH20 is its lightweight and portable design. Weighing in at just under 50 pounds, this pressure washer is easy to move around the yard or loading into a vehicle for transportation. Its compact dimension aids in storage, allowing it to fit neatly in a garage or shed when not in use.

Additionally, the PWASH20 features a durable construction with a sturdy frame that can withstand the rigors of outdoor cleaning tasks. The high-quality hose is designed to resist kinks and abrasions, further enhancing the longevity of the product. The inclusion of onboard detergent tanks provides convenience when applying soap, making it simpler to tackle medium to heavy-duty cleaning jobs.

In conclusion, the Buffalo Tools PWASH20 combines both power and convenience, making it an essential tool for homeowners seeking an effective and efficient pressure washer. Whether removing stubborn dirt from a garage floor or cleaning the exterior of a home, this model stands out for its practical features, user-friendly design, and overall performance.