Panasonic Repeater Setup Guide for VL-SW250BX Intercom System

Operate with the repeater within 2 minutes.

SW250BX_OI.indb 45

Press {MENU} (OK).

5

Press {MENU} (OK), then select “REPEATER” by pressing {VOLUME} (▲) or {PAGE} (▲).

Press {MENU} (OK), then select “REGISTRATION” by pressing {VOLUME} (▲) or {PAGE} (▲).

2

3

4 Press {MENU} (OK), then select the repeater to be registered by pressing {VOLUME} (▲) or {PAGE} (▲).

{OFF}

1 Press {MENU}, then select “REGISTRATION/ CANCELLATION” by pressing {VOLUME} (▲) or {PAGE} (▲).

FUNCTION SETTINGS

TIME AND DATE SETTINGS RING TONE SETTINGS CONNECTED DEVICE SETTINGS REGISTRATION/CANCELLATION

XX

{MENU}

{VOLUME}

Using the main monitor station

{PAGE}

Expanding the System

Setting a repeater (REGISTRATION)

You can set up to 2 optional repeaters (page 4).

LOne repeater can relay radio waves between the main monitor station and multiple sub monitor stations.

LIf you set a repeater between the main monitor station and sub monitor stations located at a distance, the repeater expands the radio wave range and may improve image distortion and/or sound cutting in and out.

Perform the following operations to register the repeater to the main monitor station, then install the repeater according to the Operating Instructions included with the repeater.

Registering the repeater to the main monitor station (REGISTRATION)

Place the repeater near the main monitor station and then operate the repeater within 2 minutes in succession to the operations of the main monitor station.

Using the repeater

To power outlet (100 – 240 V AC)

VL-FAN1

IN	USE
	USE	(LED)
		(LED)	STATUS
			STATUS

PROGRAM

PROGRAM

{PROGRAM}

STATUS indicator

6 While the power is on, press and hold {PROGRAM} for about 3 seconds.

LThe STATUS indicator ﬂashes in green.

LAfter completing the registration, the indicator lights up solid.

7 To end the operation, press {OFF} on the main monitor station.

Important:

LIf you register two repeaters, please separate them more than 3 meters to avoid electrical noise.

45

2010/08/25 15:58:38

Image 45

Panasonic VL-SW250BX Setting a repeater Registration, To power outlet 100 240 V AC, Program, Status indicator

Contents

Thank you for purchasing a Panasonic product Attached Installation Guide Important Information IntroductionPreparation Doorphone Product names used in these Operating Instructions Accessory informationIncluded items VL-SW250BX Accessory items Order number Additional/replacement accessoriesWhen using with a lobby station Compatible Panasonic PBXs Power connection For your safetyInstallation Operating safeguards Important safety instructions Installation and relocationBattery Before using For best performanceEnvironment Tapping Other informationPrivacy and rights of portrait Others Door station Location of controls Main monitor station Monitor display Main monitor station Press Volume dDisplay during operation Operation guidance Sub monitor station Rear view Speaker Charge contacts Metallic parts Charger Battery coverCharge contacts Charger stand OFF Monitor display Sub monitor station LImages on the monitor display Back Next Pad at the back Charging the sub monitor stationTo assemble the charger stand To remove the charger stand Setting the date and time Volume Voice ChangerVoice Changer Next When using an additional door station Answering a call by voice sensor Voice answer modeAnswering a call Microphone Adjusting the display brightness Main monitor station Features during a call or while monitoringAdjusting the speaker volume Main monitor station Main monitor station only To speak to the visitor Using Door KEY buttonSpeak while pressing and holding Talk To hear the visitor Transferring a call VolumeTo transfer a call To receive a transferred call Monitor Talk OFF When answering a callMonitor OFF Talk NTo speak to the other party Press Volume or page , then When installing 2 door stationsMonitoring the outside Door station monitor Monitor Recording an image NAuto image updateAuto recording PLAY/REC Manual recording Press PLAY/RECPress D REC Viewing recorded images using the main monitor station Voice Changer Menu Volume OFFNTo view the next image Menu Pause Voice Changer BackMenu Play Menu Menu NTo view a series of 8 continuous images Viewing recorded images using the sub monitor station Button and guidance Operation Back Image status Protecting the recorded images Volume MenuSelect To release protection Erasing an image Press Volume YESYou can erase unnecessary images Menu OFF Volume Menu OFF Caller ReceiverOFF Talk Adjusting the ringer volume Main monitor station Sub monitor station Changing the ringer toneRinger tone patterns Sound Sound 1 REPEAT*1 Sound 2 REPEAT*1 Sound 3 REPEAT*1 Press Menu OK, then select Door KEY by pressing Volume or Setting Door KEY buttonVolume or Press Menu OK, then select the desired item by pressing Item function Setting How to change the function settingsFunction list of the main monitor station Time and Date PICTURES, 1 Picture NORMAL, LOW Terminal 2 SIGNALS, 2 Terminals 1 Signal LobbyExternal Device Demo Mode REGISTRATION/CANCELLATION Registration Cancellation Ring Volume Door HIGH, MEDIUM, LOW, OFF Function list of the sub monitor stationStation Voice Answer ON, OFF Init Settings YES, noDisp REC Date ALWAYS, 3 SEC Contrast Sub monitor station*1 Door station*1 Main monitor station Expanding your system with optional units Using with Panasonic PBX Units required to be installed Adding a door stationOperating the door opener Please use only a Panasonic PBX Using the sub monitor station Using the main monitor stationTo register a canceled sub monitor station page 46 again Adding a sub monitor station Registration To power outlet 100 240 V AC Setting a repeater RegistrationStatus indicator Program Cancellation Canceling registration of the sub monitor station/repeater Troubleshooting Monitor display Problem Cause & SolutionAway from those appliances. Try again Problem Cause & Solution Conversation Doorphone/Intercom Problem Cause & SolutionRinger tone Problem Cause & Solution Sub monitor station/Battery Problem Cause & Solution Others Problem Cause & SolutionRemove the battery and insert it again Help Sub monitor station only Problem Cause & Solution Error messages Battery replacement Cleaning Main monitor station VL-MW250BX SpeciﬁcationsSub monitor station VL-W605BX Door station VL-V566BX Lring Volume Lring Tone Function SettingsLvoice Answer Lvoice Changer Lplay Lamp Flashing Lcontrast Lregistration Loutgoing VOL Attach your sales receipt here For your future reference