Panasonic VL-SW250BX operating instructions Units required to be installed Adding a door station

Expanding the System

Units required to be installed

Adding a door station:

Door station (up to 2 units including your original unit)

or

VL-V566BXVL-GC005BX

Operating the door opener:

Door opener (up to 2 units)*2

You can also connect an optional lobby station for apartment complexes (page 4).

Connecting to a door opener allows you to open the door using the Door opener {DOOR KEY} on the main monitor station or the sub monitor station

(page 20).

Using with Panasonic PBX:

Connecting to a PBX allows you to answer calls from the door station using additional machines (extensions).

Please use only a Panasonic PBX (page 4).

*2

PBX

Terminal box

Note:

●If you answer a call from the door station with a PBX extension, the camera image taken by the door station will be displayed at the main

monitor station. will appear in the top of the display indicating that a PBX extension is on the call (see C on page 11). While is displayed, you cannot answer the call using the main monitor station. The display will turn off when the conversation between the door station and the PBX extension ends, or if the call duration time is longer than 3 minutes.

●If you answer a call from the door station with the main monitor station or the sub monitor station, the call will continue to ring at the extension for about 15 to 30 seconds. Even if an extension user wants to answer the call while the call is ringing, the extension user cannot participate in the call.

When using two door stations

(excluding an optional lobby station, page 4):

From the PBX extension, you can call up the only one door station that has received the last incoming call or has talked with.

43

SW250BX_OI.indb 43

2010/08/25 15:58:37