Panasonic VL-SW250BX Error messages, Sub monitor station only Problem Cause & Solution

		Help
Error messages
N Main monitor station/Sub monitor station
Problem	Cause & Solution	Page
IN USE	LThe main monitor station or the sub monitor station is in use.	―
	Try again later.
PROTECTED PIC	LThe image you tried to erase is protected. Release the	30
REMOVE PROTECT	protection, then erase it.	31
(Main monitor station)	LThe number of images you can protect has been exceeded.	30
PROTECT PIC FULL	You can protect up to 20 images. Release the protection from
CAN NOT PROTECT	other images, then try again.
(Sub monitor station)	– Unprotected images will be overwritten by new images.
PROTECT FULL
CANT PROTECT
N Sub monitor station only
Problem	Cause & Solution	Page
CAN NOT CONNECT	LThe sub monitor station is too far from the main monitor	7, 45
	station. Move closer to the main monitor station. If you install a
	repeater (optional), the problem may be solved.	7, 45
	LThere is an object such as a concrete wall obstructing the
	signal. Move to a place without an obstacle. If you install a
	repeater (optional), the problem may be solved.	7
	LA microwave or wireless LAN appliance is in use. Move closer
	to the main monitor station or use a sub monitor station located
	away from those appliances. Try again.
REGISTRATION ERROR	LThe registration to the main monitor station is not completed.	44
	Move closer to the main monitor station and register it again.

51

SW250BX_OI.indb 51

2010/08/25 15:58:39