Panasonic VL-SW250BX operating instructions Adjusting the ringer volume

LThe ringer sounds at the selected volume level.

– When “OFF” is selected, 2 short beeps sound.

Press {D} (OK).

L“r” moves to the selected item. To end the operation, press {OFF}.

Current setting

MEDIUM LOW OFF

Sub monitor station

1 Press {MENU}, then select “RING VOLUME” by pressing {▲} or {▲}.

2 Press {D} (OK), then select the desired item to change the setting by pressing {▲} or {▲}.

DOOR

PAGE

3 Press {D} (OK), then select the desired volume by pressing {▲} or {▲}.

VOLUME/DOOR ●HIGH

Programming

Adjusting the ringer volume

You can adjust the following ringer volumes by using the main monitor station or the sub monitor station during standby.

LThe ringer heard when receiving calls from the door station. (3 levels and “OFF” are available.) LThe ringer for paging calls. (3 levels are available.)

		Main monitor station
1	Press {MENU}, then select “RING TONE
	SETTINGS” by pressing {VOLUME} (▲) or
	{PAGE} (▲).
2	Press {MENU} (OK), then select “RING VOLUME”
	by pressing {VOLUME} (▲) or {PAGE} (▲).
3	Press {MENU} (OK), then select the desired item
	to change the setting by pressing {VOLUME} (▲)
	or {PAGE} (▲).
			DOOR STATION
			PAGE
4	Press {MENU} (OK), then select the desired
	volume by pressing {VOLUME} (▲) or
	{PAGE} (▲).
		●	RING VOLUME/DOOR STATION
			HIGH
			MEDIUM
	Current		LOW
	setting		OFF

LThe ringer sounds at the selected volume level.

– When “OFF” is selected, 2 short beeps sound.

5 Press {MENU} (OK).

L“r” moves to the selected item.

6 To end the operation, press {OFF}.

Note:

LYou can also adjust the ringer volume while receiving a call.

1 Press {VOLUME}.

RING VOLUME

2 Press {PAGE} (-)or {MENU} (+).*1

LYou can also adjust the ringer volume for calls from the door station during standby.

Press {VOLUME}. Ä Press {PAGE} (-)or {MENU} (+).*1

*1 To turn off the ringer volume for calls from the door station, press and hold {PAGE} (-)until 2 short beeps sound.

– To turn the ringer on, press {MENU} (+).

4

5

Note:

LYou can also adjust the ringer volume while receiving a call by pressing {▲} or {▲}.*1

*1 To turn off the ringer volume for calls from the door station, press and hold {▼} until 2 short beeps sound.

– To turn the ringer on, press {▲}.

33

SW250BX_OI.indb 33

2010/08/25 15:58:35