Features during a call or while monitoring | Panasonic VL-SW250BX

Doorphone

Features during a call or while monitoring

Scrolling an image right or left on the sub monitor station

Sub monitor station only

1 Press {▲} or {▲}.

LThe displayed image is scrolled slightly to the right or left.

Adjusting the display brightness

		Main monitor station
1	Press {MENU}, then select “BRIGHTNESS” by
	pressing {VOLUME} (▲SELECT).
2	Adjust the brightness by pressing {PAGE} (DARK)
	or {MENU} (BRIGHT).

Sub monitor station

1 Press {MENU}, then select “BRIGHTNESS” by pressing {▼} or {▲}.

2	Press {D} (OK).
3	Adjust the brightness by pressing {▲		} or {▲}.

Hiding the operation guidance
		Main monitor station only
1	Press {MENU}, then select “GUIDE OFF” by
	pressing {VOLUME} (▲SELECT).

2 Press {MENU} (OK).

LThe guidance disappears from the display temporarily. It reappears when you perform another operation.

Adjusting the volume of your voice heard at the door station

You can adjust the volume of your voice heard at the door station by setting the main monitor station.

Main monitor station only

1 Press {VOLUME}, then select “OUTGOING VOL” by pressing {VOLUME} (▲SELECT).

2 Adjust the volume by pressing {PAGE} (-)or

{MENU} (+).

Adjusting the speaker volume

Main monitor station

1 Press {VOLUME}, then select “INCOMING VOL” by pressing {VOLUME} (▲SELECT).

2 Adjust the volume by pressing {PAGE} (-)or

{MENU} (+).

Sub monitor station

1 Adjust the volume by pressing {▼} or {▲}.

Speaking with the modiﬁed sound of your voice (Voice changer)

Main monitor station

1 Press {VOICE CHANGER}.

L appears on the display.

Sub monitor station

1 Press {MENU}, then select “VOICE CHANGER” by pressing {▼} or {▲}.

2 Press {D} (OK).

L appears on the display.

Note for and :

LVoice changer mode is canceled after the conversation ends.

LTo cancel the voice changer mode during a conversation, perform the operation above.

19

02_VL-SW250BX.indd 19

2010/09/14 19:16:11

Image 19

Panasonic VL-SW250BX Features during a call or while monitoring, Adjusting the display brightness Main monitor station

Contents

Thank you for purchasing a Panasonic product Attached Installation Guide Doorphone IntroductionImportant Information Preparation VL-SW250BX Accessory informationProduct names used in these Operating Instructions Included items Compatible Panasonic PBXs Additional/replacement accessoriesAccessory items Order number When using with a lobby station Operating safeguards For your safetyPower connection Installation Installation and relocation Important safety instructionsBattery For best performance Before usingEnvironment Others Other informationTapping Privacy and rights of portrait Door station Location of controls Main monitor station Operation guidance Press Volume dMonitor display Main monitor station Display during operation Sub monitor station Charger stand Battery coverRear view Speaker Charge contacts Metallic parts Charger Charge contacts OFF Monitor display Sub monitor station LImages on the monitor display Back Next To remove the charger stand Charging the sub monitor stationPad at the back To assemble the charger stand Volume Voice Changer Setting the date and timeVoice Changer Next Microphone Answering a call by voice sensor Voice answer modeWhen using an additional door station Answering a call Main monitor station only Features during a call or while monitoringAdjusting the display brightness Main monitor station Adjusting the speaker volume Main monitor station To hear the visitor Using Door KEY buttonTo speak to the visitor Speak while pressing and holding Talk To receive a transferred call VolumeTransferring a call To transfer a call NTo speak to the other party When answering a callMonitor Talk OFF Monitor OFF Talk Monitor When installing 2 door stationsPress Volume or page , then Monitoring the outside Door station monitor PLAY/REC NAuto image updateRecording an image Auto recording Press PLAY/REC Manual recordingPress D REC Voice Changer Menu Volume OFF Viewing recorded images using the main monitor stationNTo view the next image Menu Menu Voice Changer BackMenu Pause Menu Play NTo view a series of 8 continuous images Viewing recorded images using the sub monitor station Button and guidance Operation Back Image status To release protection Volume MenuProtecting the recorded images Select Menu OFF Press Volume YESErasing an image You can erase unnecessary images Caller Receiver Volume Menu OFFOFF Talk Adjusting the ringer volume Sound Sound 1 REPEAT*1 Sound 2 REPEAT*1 Sound 3 REPEAT*1 Changing the ringer toneMain monitor station Sub monitor station Ringer tone patterns Press Menu OK, then select the desired item by pressing Setting Door KEY buttonPress Menu OK, then select Door KEY by pressing Volume or Volume or Time and Date How to change the function settingsItem function Setting Function list of the main monitor station PICTURES, 1 Picture NORMAL, LOW Lobby Terminal 2 SIGNALS, 2 Terminals 1 SignalExternal Device Demo Mode REGISTRATION/CANCELLATION Registration Cancellation Function list of the sub monitor station Ring Volume Door HIGH, MEDIUM, LOW, OFFStation Contrast Init Settings YES, noVoice Answer ON, OFF Disp REC Date ALWAYS, 3 SEC Sub monitor station*1 Door station*1 Main monitor station Expanding your system with optional units Please use only a Panasonic PBX Units required to be installed Adding a door stationUsing with Panasonic PBX Operating the door opener Adding a sub monitor station Registration Using the main monitor stationUsing the sub monitor station To register a canceled sub monitor station page 46 again Program Setting a repeater RegistrationTo power outlet 100 240 V AC Status indicator Cancellation Canceling registration of the sub monitor station/repeater Monitor display Problem Cause & Solution TroubleshootingAway from those appliances. Try again Conversation Doorphone/Intercom Problem Cause & Solution Problem Cause & SolutionRinger tone Problem Cause & Solution Others Problem Cause & Solution Sub monitor station/Battery Problem Cause & SolutionRemove the battery and insert it again Help Sub monitor station only Problem Cause & Solution Error messages Battery replacement Cleaning Door station VL-V566BX SpeciﬁcationsMain monitor station VL-MW250BX Sub monitor station VL-W605BX Lcontrast Lregistration Function SettingsLring Volume Lring Tone Lvoice Answer Lvoice Changer Lplay Lamp Flashing Loutgoing VOL Attach your sales receipt here For your future reference