Panasonic VL-SW250BX operating instructions Function list of the sub monitor station, Station

Programming

Changing the function settings of the sub monitor station (Function list)

How to change the function settings

{▲} {▲} {D}

{MENU}

{OFF}

1 Press {MENU}, then select the desired item by pressing {▲} or {▲}.

2 Press {D} (OK), then select the desired setting by pressing {▲} or {▲}.

LIn some functions, repeat this operation according to the display instructions.

3 Press {D} (OK).

4 To end the setting, press {OFF}.

Note:

LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen automatically quits.

Function list of the sub monitor station

The default setting is indicated in bold.

Item (function)	Setting
RING VOLUME	DOOR: HIGH, MEDIUM, LOW, OFF
	PAGE : HIGH, MEDIUM, LOW
	LYou can select the ringer volume of the sub monitor station (page 33).
RING TONE	DOOR 1: SOUND1, SOUND1 REPEAT,
	SOUND2, SOUND2 REPEAT,
	SOUND3, SOUND3 REPEAT
	DOOR 2: SOUND1, SOUND1 REPEAT,
	SOUND2, SOUND2 REPEAT,
	SOUND3, SOUND3 REPEAT
	LYou can select the ringer tone of the sub monitor station for calls from a door
	station (page 34).

40

SW250BX_OI.indb 40

2010/08/25 15:58:37