Recording

Recording an image

The main monitor station can record (save) images from up to 50 calls (or monitoring to the door station). L8 images are recorded for a call/monitoring (default setting).

Auto recording

When you receive a call from the door station, 8 images are automatically recorded with the following timing.

(1st image)

2nd to 8th images:

Recorded every 1 second after the 1st image is recorded.

1st image:

Recorded after about 2 seconds when receiving a call.

LIf you do not answer a call, the images for the call are recorded, and the main monitor station and the sub monitor station notify you that there are unviewed images as follows.

You can view the images using either the main monitor station or the sub monitor station (page 26, 28).

(Main monitor station)

(Sub monitor station)

{PLAY/REC}

appears.

flashes.

Note:

LYou can set the {PLAY/REC} button not to flash when there are unviewed images (“PLAY LAMP FLASHING” on page 37).

LWhen you answer a call, the recorded images will be treated as viewed images.

LIf you receive a call from the other door station while monitoring or during a conversation (page 22), the images for the call are not recorded unless you answer it.

LYou can change the number of images to be recorded from “8 PICTURES” to “1 PICTURE” (“DOOR STATION PIC REC NUMBER” on page 37).

1 PICTURE: A maximum of 100 images can be recorded.

8 PICTURES: The quality of the recorded images will be lower compared to “1 PICTURE”.

LIf you receive a call from the other door station while recording when “DOOR STATION PIC REC NUMBER” is set to “8 PICTURES”, all 8 images may not be recorded. (At least 1 image is recorded.)

NAuto image update

If a new image is recorded when the maximum number of images is already stored, the oldest image (including unviewed images) is automatically erased.

Note:

LYou can protect the image that you do not want to erase (page 30).

24

SW250BX_OI.indb 24

2010/08/25 15:58:33

Page 24
Image 24
Panasonic VL-SW250BX operating instructions Recording an image, Auto recording, Play/Rec, flashes, NAuto image update