Panasonic VL-SW250BX Protecting the recorded images, Volume Menu, Select, To release protection

Recording

Protecting the recorded images

You can protect up to 20 recorded images that you do not want to erase while viewing images.

{VOLUME}

{MENU}

XX

	{▲} {▲}
	{D}
{OFF}	{OFF}

Main monitor station

1 While viewing the image, press {MENU}, then

select “PROTECT” by pressing {VOLUME}

(▲SELECT).

BRIGHTNESS

GUIDE OFF

PROTECT

DELETE

2 Press {MENU} (OK).

L“PROTECTED” appears on the display.

3 To end the operation, press {OFF}.

N To release protection

1 While viewing the protected image, press {MENU}, then select “PROTECT” by pressing {VOLUME} (▲SELECT).

2 Press {MENU} (OK).

L“PROTECTED” disappears from the display.

Sub monitor station

1 While viewing the image, press {D} (MENU), then select “PROTECT” by pressing {▲} or {▲}.

PICTURE MENU

PROTECT

DELETE

2 Press {D} (OK).

L appears on the display.

3 To end the operation, press {OFF}.

N To release protection

1 While viewing the protected image, press {D} (MENU), then select “PROTECT” by pressing {▲} or {▲}.

2 Press {D} (OK).

L disappears from the display.

Note:

LIf you protect one of a sequence of 8 continuously recorded images, the 8 images are protected as one set. This set of 8 images is counted as one image.

LYou can protect a maximum of 20 images. To protect other images after this maximum is reached, you need to release the protection from other images first.

30

SW250BX_OI.indb 30

2010/08/25 15:58:35