Pull Off the Dial;

Pull Out at the Bottom

Colder Meat

Storage Temperatures

Removing the light Shields.

To remove the refrigerator or freezer light shield when cleaning or changing a bulb, first unplug the refrigerator. Pull off the control dial; pull the bottom of the shield straight out; lift the top of the shield off its supports. To replace it, hook the top of the shield over its support. Press the bottom till the catches snap into place.

To replace the bulb, behind the icemaker, unplug the refrigerator and remove the ice bin (see ice maker instructions). Use no larger

than a 40-watt appliance bulb. Replace the ice bin.

There is also a light just above the crisper on the back wall. To replace the bulb, pull light shield off from the top. (Be sure refrigerator

IS unplugged.) Replace bulb. To replace light shield hook over studs at the bottom and snap in at the top.

Adjusting the Meat Pan Air Control.

There is an opening between the freezer and refrigerator beside the meat pan. Air flows from the freezer against the meat pan and helps keep it colder than the rest of the refrigerator. The Meat Pan Air Control can be set to let more cold air in for a colder meat storage

temperature, or to stop the flow of cold air if meat temperature is too cold.

Set the control between the COLD and COLDER settings. If fresh beef has a few ice crystals and is storing well for 3 to 5 days, the control is set about right. If you want colder meat storage tempera- tures, move the control toward COLDER. If meat is freezing, move the control up toward Cold.

Energy

Saving

Tips

 

 

 

You can

help

vour

refrigerator

use ES

electricNib

l

l Check door gaskets for a tigh’ seal Levem ihe

 

cabinet to be sure of a good seal

 

 

l Clean the condenser co11regularl,V

 

 

l Open the door as few times as possible T~I-k

 

about

what

you

need

before

yod c’Den the aoor

l

Get everythlng out at ore time Keep foods or-

 

gonized so you won’t have to search for what

 

you want. Close door

as soon as fo&

IS removed

l

l Go ahead and fill up the refrigerator, bu; dor i overcrowd it so air movement IS blockec

It IS a waste of electricity to set the refrigerator and freezer to temperatures colder tba? they need to be If ice cream ISfirm in the freezer and drinks are as cold as your family likes them, that’s cold enough

Keep the power-saving heater control switch #oq OFF unless moisture forms or the refrigerator exterior

Make sure your refrigerator IS not next to a heat source such as a range, water heater, furnace, radiator, or In direct sunllght

Page 7
Image 7
Whirlpool EHD251CMWR0 warranty Removing the light Shields, Adjusting the Meat Pan Air Control