Chicago Electric 92146 manual Personal Safety, Tool USE and Care

Page 4

PERSONAL SAFETY

1.Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch/Trigger, or plugging in power tools with the Power Switch on, invites accidents.

4.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Always wear ANSI approved safety impact goggles and thick rubber boots during use and maintenance.

TOOL USE AND CARE

1.Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand is unstable and may lead to loss of control. Only work on a workpiece that is properly secured. Holding any object while it is pressure washed can cause serious personal injury by the high pres- sure stream.

2.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equip- ment, tools, or attachments. Do not use this product for a purpose for which it was not intended.

3.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

SKU 92146

For technical questions, please call 1-800-444-3353.

PAGE 4

Image 4
Contents For technical questions or replacement parts, please call HP Pressure WasherProduct Specifications General Safety Rules Important Safety InstructionsUnpacking Read and Understand ALL InstructionsWork Area Electrical SafetySKU For technical questions, please call Personal Safety Tool USE and CareSpecific Safety Rules ServiceCleaning section SKU For technical questions, please call Grounding Extension Cords Grounded Tools Tools with Three Prong PlugsSee Figure B, next See Figure BFigure B Figure CProduct Features and Precautions See Figure D SKU For technical questions, please callFigure E Pre-Operation TipsAssembly and Operating Instructions Assembly Diagrams on pages 18To Set Up The Pressure Washer See Figure GSee Figure H To Adjust The Spray PatternSee Figure J, next See Figure F, To Apply a DetergentSee Figure F Shutdown Precautions INSPECTION, MAINTENANCE, and CleaningHow To Avoid Damaging Surfaces Do not use damaged equipment To Clean The NozzleSee Figure K Parts List Please Read the Following CarefullyAssembly Diagram 34A Detergent Bottle