Craftsman 580.767451 owner manual How to Use the Hose Reel, Wash and Rinse Surface, Tips

Page 11

2.If usinganotherchemicaldesignedforusewith pressurewashers,preparechemicalsolutionas requiredbychemicalmanufacturerFillchemical. reservoir(s)withpreparedsolutionasneeded.

3.RotatetheDial-A-CleanerTMselector knob to letter

corresponding to desired reservoir.

4.Push adjustable nozzle forward to low pressure mode. Chemical cannot be applied with nozzle in high pressure position.

5.Connect garden hose to water inlet, check that high pressure hose is connected to spray gun and pump (see pages 7-8), and start engine.

WARNING

•Kee# seray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with beth hands when using high pressure spray to avoid injury if gun kicks back.

6.Start at lower portion of area to be washed and

work upward, using long, even overlapping strokes.

4.Rotate the Dial-A-Cleaner TM selector knob to letter corresponding to System Rinse tank. As clean rinse water is drawn through the system, continue the flow until no detergent foam is observed.

5.Rotate the Dial-A-Cleaner TM selector knob to the OFF position when finished to prevent chemical leakage.

Siphoning

DO NOT siphon standing water for your water supply. Contaminated, brackish or dir_ water can damage the pump. Connect only to household water supply.

How to Use the Hose Reel

Your pressure washer is equipped with a hose reel that is designed to store your hose when unit is not in use. These instructions are for short term storage only. For long term storage see "Storage" on page 16.

After each use:

1.Disconnect hose from spray gun and high pressure outlet on pump.

2.Drain water from hose.

3.Slide one end of hose into hole on hose reel. Turn hose reel with handle to coil hose onto reel.

7.Allow detergent to 'soakin'(between 3-5 minutes) before washing and rinsing. Reapply as needed to prevent surface from drying.

Wash and Rinse Surface

After you have applied detergent, scour the surface with the high pressure water stream and then rinse it clean, as follows:

1.Pull adjustable nozzle backward for high pressure mode. Chemical will not flow when in high pressure mode.

2.Test a small area of the surface to be cleaned. Make sure there is no surface damage caused by the high pressure spray.

. Expand spray pattern for a more gentle rinsing action. Start at top of area to be rinsed, working down with same action as for cleaning.

Rinse System After Every Use

It is imperative that the chemical dispensing system be rinsed after each use to prevent clogging or leaks:

1.Fill System Rinse reservoir with clean water.

2.Before disconnecting water supply, start your cleaning system.

3.Push nozzle forward for low pressure mode.

4.Push other end of hose into clip on side of unit.

IMPORTANT: DO NOT use your pressure washer with the hose coiled onto the hose reel. The hose reel is for

storage purposes only.

Tips

NEVER use garden hose inlet to siphon detergent

or wax,

If you hold the spray nozzle too far away from the

object being cleaned, washing will not be as effective.

- Always store the cleaning system with the Dial-A- Cleaner TM selector knob in the OFF position.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F. The system engages to cool the pump by discharging the warm water onto

the ground,

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hours Mon. FrL 8 a.m. to 5 p.m. CT Horsepower 2500 PSISEARS, Roebuck and CO,, Hoffman Estates, IL 60179 U.S.A Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Hazard Symbols and MeaningsCancer, b rth defects, or other reproduct ve harm Turn pressure washer OFF and let it cool at leastEngine exhaust from this product contains Chemicals known to the State of California to causeAre correctly attached System Rinse, Detergent and Chemical Reservoirs Know Your Pressure WasherRemove Pressure Washer from Carton Carton ContentsAssembling Cleaning System Connect Hose and Water Supply to Pump Add Engine OilAdd Fuel Nspe t Checklist Before Starting EngineHOW to USE Your Cleaning System SafetyLatchNever adiLtStsprayPattem when spraying How to Stop Your Cleaning SystemTips How to Use the Hose ReelWash and Rinse Surface Rinse System After Every UseOwners Responsibilities Product SpecificationsPressure Washer Specifications Engine SpecificationsBefore Each USE Pressure Washer MaintenanceChanging Pump Oil Pump MaintenanceRingMaintenance To remove a worn or damaged o-ringChecking Oil Level Engine MaintenanceService Air Cleaner Changing OilPart Service Spark PlugSpark Arrester Service Winter Storage To protect the unit from freezing temperaturesAfter Each USE Change Oil Long Term StorageProtect Fuel System Oil Cylinder BoreTo Fast position. If Engine lacks power Engine hunts or faltersWater supply Is obstructedPage 7t75187GS Optional AccessoriesDescription Items Not Illustrated DescriptionCraftsman 2500 PSI Cleaning System Pump --Exploded View Part # Description 883 1022 868163276 6330 633A@ 524 ENGINE, 6.75 HP, Briggs and Stratton, 128612 Exploded View163 276 12795 3o5 271716 ENGINE, 6.75 HP, Briggs and Stratton, 128612 Parts ListDescription Page Length of Coverage Owners Warranty ResponsibilitiesSears Emission Control Defects Warranty Provisions MaintenanceSimbolos de Peligro y Significados Admertengia IadvertenciaAdvertencia Precaucion AdvertenciaprecaucionPresi6n Conozca SU Maquina Lavadora DE PresionTapa del Depbsito del Aceite Llene et motor con aceite Montaje del Carrete de la Manguera Montaje DEL Sistema DE LimpiezaContenido DE LA Caja Despegue del motor Agregue Aceite de MotorAgregue Gasolina Iimpiela AdvertengiaLista DE Revision Previa AL Arranque DEL Motor Conecte la Manguera y el Suministro de Agua a la BombaPara Poner en Marcha el Sistema de Limpieza Como Usar SU Sistema DE LimpiezaPrecauci N Trabajo de Limpieza con la Boquilla Ajustable Cemo Detener su Sistema de LimpiezaCemo Usar la Boquilla Ajustable Sugerencias Succi6n de LiquidosC6mo Usar el Carrete de la Manguera Lavado y Enjuague de la SuperficieDel Motor Responsabilidades DEL PropietarioEspecificaciones DEL Producto Recomendaciones GeneralesLavadora a Presion Antes DE Cada USORevisi6n del Nivel del Aceite Mantenimiento DE LA BombaMantenimiento DEL Motor Mantenimiento de los Anillos oCarburador Cambio de AceiteRemplace la Bujia Servicio del Depurador de AireAlmacenamiento Para Invierno PRECAUCI6N Pare proteger la unidad de las temperatures de congelamientoOtros Almacenamiento ProlongadoPregaugion El motor no tiene fuerza Soluci6nSin gasolina Disposicionea A. and Canada Anytime, day or night

580.767451 specifications

The Craftsman 580.767451 is a powerful and versatile blowers that embodies the brand's commitment to quality and durability. Designed for homeowners and professionals alike, this equipment is a dependable choice for various outdoor tasks, such as leaf blowing, yard cleanup, and debris removal.

One of the standout features of the Craftsman 580.767451 is its potent engine. Equipped with a robust 27 cc, 2-cycle engine, this blower provides ample power to tackle tough jobs efficiently. This high-performance engine not only ensures effective air output but also facilitates easy starting, minimizing the hassle often associated with gas-powered tools. The blower is designed with an ergonomic handle that allows for comfortable use during prolonged periods, enabling users to maneuver with ease and reducing fatigue.

The Craftsman 580.767451 includes a variable speed throttle that allows users to adjust the airflow to suit their specific needs. Whether users require a gentle breeze to clear delicate flower beds or a concentrated blast to move wet leaves and heavy debris, this blower's adjustable speed feature offers exceptional control and versatility. Additionally, the lightweight design of the blower makes it easy to handle, contributing further to user comfort and efficiency.

This Craftsman model is also equipped with a built-in vacuum attachment, allowing users to convert the blower into a vacuum for easy cleanup of leaves and debris. This dual functionality enhances its value, as users can easily switch between blowing and vacuuming tasks without the need for multiple tools.

The Craftsman 580.767451 also features a reliable air filtration system, which helps to prolong the life of the engine by preventing dust and debris from entering critical components. The design ensures that it operates smoothly and efficiently, reducing maintenance requirements over time.

In summary, the Craftsman 580.767451 is a feature-rich blower that combines power, flexibility, and ease of use. With its strong 27 cc engine, variable speed options, and vacuum functionality, it meets the demands of both casual users and more seasoned landscaping professionals. Its thoughtful design and reliable performance make it a valuable addition to any outdoor toolkit. Whether tackling seasonal yard work or preparing for special events, this blower provides the efficiency and power required to accomplish tasks with ease.
Top Page Image Contents