Craftsman 580.767451 owner manual Add Engine Oil, Add Fuel, Connect Hose and Water Supply to Pump

Page 7

NOTE: There may be small tube adapters included with the hose reel kit that are not used on this model.

IMPORTANT: You must take the hose off the reel when operating your cleaning system. The reel is for storage purposes only.

Add Engine Oil

IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure.

NOTE: When adding oil to the engine crankcase, use only high quality detergent oil rated with API service classification SF, SG, SH, SJ or higher rated SAE 30 weight. DO NOT use special additives.

1.Choose a viscosity according to table below.

--E

STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

*The use of multi-viscosity oils (5W-30, 10W-30, etc.) in temperatures above 40°F (4°C) will result in higher than normal oil consumption. When using a multi- viscosity oil, check oil more frequently.

If using SAE 30 oil in temperatures below 40°F (4°C), it will result in hard starting and possible engine bore damage due to inadequate lubrication.

2.Place pressure washer on a level surface.

3.Clean area around oil fill.

4.Remove oil fill cap and dipstick.

5.Wipe dipstick clean, insert it into oil fill hole and tighten securely, remove dipstick. Add recommended oil up to "Full" mark on dipstick.

Add Fuel

_k ARNINGt NEVER fill fuel tank indoors. NEVER fill fuel tank when engine is running or

hot. Allow unit to cool for two minutes before refueling. DO NOT light a cigarette or smoke when filling the fuel tank.

_k ARNING1 NEVER fill fuel tank completely full. Provide space for fuel expansion. Wipe

away any fuel spillage from engine and equipment before starting.

1.Use fresh, clean unleaded automotive fuel and

store in approved, clean, covered containers. Use clean fill funnels. NEVER use "stale" fuel left over

from last season or fuel stored for long periods.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add "UNLEADED" regular fuel to fuel tank. Use a funnel to prevent spillage. Fill tank to about 1.5" below the bottom of the filler neck.

#NN_N_NNNN_N_f

4.Install fuel cap and wipe up any spilled fuel.

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts, such as the carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that alcehol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. See "Storage" on pages 17-18. NEVER use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

©

6.Pour slowly. Wipe dipstick clean each time oil level is checked. DO NOT overfill.

NOTE: You may not need to use all the supplied oil.

7.Install oil fill plug and dipstick, tighten securely.

NOTE: Check oil often during engine break-in.

Connect Hose and Water Supply to Pump

IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine.

1.Uncoil high pressure hose and attach one end of hose to base of spray gun. Tighten by hand.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SEARS, Roebuck and CO,, Hoffman Estates, IL 60179 U.S.A Horsepower 2500 PSIHours Mon. FrL 8 a.m. to 5 p.m. CT Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Hazard Symbols and MeaningsCancer, b rth defects, or other reproduct ve harm Turn pressure washer OFF and let it cool at leastEngine exhaust from this product contains Chemicals known to the State of California to causeAre correctly attached System Rinse, Detergent and Chemical Reservoirs Know Your Pressure WasherAssembling Cleaning System Carton ContentsRemove Pressure Washer from Carton Add Fuel Add Engine OilConnect Hose and Water Supply to Pump Nspe t Checklist Before Starting EngineHOW to USE Your Cleaning System SafetyLatchNever adiLtStsprayPattem when spraying How to Stop Your Cleaning SystemTips How to Use the Hose ReelWash and Rinse Surface Rinse System After Every UseOwners Responsibilities Product SpecificationsPressure Washer Specifications Engine SpecificationsBefore Each USE Pressure Washer MaintenanceChanging Pump Oil Pump MaintenanceRingMaintenance To remove a worn or damaged o-ringChecking Oil Level Engine MaintenanceService Air Cleaner Changing OilSpark Arrester Service Service Spark PlugPart After Each USE To protect the unit from freezing temperaturesWinter Storage Change Oil Long Term StorageProtect Fuel System Oil Cylinder BoreTo Fast position. If Engine lacks power Engine hunts or faltersWater supply Is obstructedPage 7t75187GS Optional AccessoriesDescription Items Not Illustrated DescriptionCraftsman 2500 PSI Cleaning System Pump --Exploded View Part # Description 883 1022 868163163 276 12795 ENGINE, 6.75 HP, Briggs and Stratton, 128612 Exploded View276 6330 633A@ 524 3o5 Description ENGINE, 6.75 HP, Briggs and Stratton, 128612 Parts List271716 Page Length of Coverage Owners Warranty ResponsibilitiesSears Emission Control Defects Warranty Provisions MaintenanceSimbolos de Peligro y Significados Advertencia IadvertenciaAdmertengia Precaucion AdvertenciaprecaucionTapa del Depbsito del Aceite Llene et motor con aceite Conozca SU Maquina Lavadora DE PresionPresi6n Contenido DE LA Caja Montaje DEL Sistema DE LimpiezaMontaje del Carrete de la Manguera Agregue Gasolina Agregue Aceite de MotorDespegue del motor Iimpiela AdvertengiaLista DE Revision Previa AL Arranque DEL Motor Conecte la Manguera y el Suministro de Agua a la BombaPrecauci N Como Usar SU Sistema DE LimpiezaPara Poner en Marcha el Sistema de Limpieza Cemo Usar la Boquilla Ajustable Cemo Detener su Sistema de LimpiezaTrabajo de Limpieza con la Boquilla Ajustable Sugerencias Succi6n de LiquidosC6mo Usar el Carrete de la Manguera Lavado y Enjuague de la SuperficieDel Motor Responsabilidades DEL PropietarioEspecificaciones DEL Producto Recomendaciones GeneralesLavadora a Presion Antes DE Cada USORevisi6n del Nivel del Aceite Mantenimiento DE LA BombaMantenimiento DEL Motor Mantenimiento de los Anillos oCarburador Cambio de AceiteRemplace la Bujia Servicio del Depurador de AireAlmacenamiento Para Invierno PRECAUCI6N Pare proteger la unidad de las temperatures de congelamientoPregaugion Almacenamiento ProlongadoOtros Sin gasolina Soluci6nEl motor no tiene fuerza Disposicionea A. and Canada Anytime, day or night

580.767451 specifications

The Craftsman 580.767451 is a powerful and versatile blowers that embodies the brand's commitment to quality and durability. Designed for homeowners and professionals alike, this equipment is a dependable choice for various outdoor tasks, such as leaf blowing, yard cleanup, and debris removal.

One of the standout features of the Craftsman 580.767451 is its potent engine. Equipped with a robust 27 cc, 2-cycle engine, this blower provides ample power to tackle tough jobs efficiently. This high-performance engine not only ensures effective air output but also facilitates easy starting, minimizing the hassle often associated with gas-powered tools. The blower is designed with an ergonomic handle that allows for comfortable use during prolonged periods, enabling users to maneuver with ease and reducing fatigue.

The Craftsman 580.767451 includes a variable speed throttle that allows users to adjust the airflow to suit their specific needs. Whether users require a gentle breeze to clear delicate flower beds or a concentrated blast to move wet leaves and heavy debris, this blower's adjustable speed feature offers exceptional control and versatility. Additionally, the lightweight design of the blower makes it easy to handle, contributing further to user comfort and efficiency.

This Craftsman model is also equipped with a built-in vacuum attachment, allowing users to convert the blower into a vacuum for easy cleanup of leaves and debris. This dual functionality enhances its value, as users can easily switch between blowing and vacuuming tasks without the need for multiple tools.

The Craftsman 580.767451 also features a reliable air filtration system, which helps to prolong the life of the engine by preventing dust and debris from entering critical components. The design ensures that it operates smoothly and efficiently, reducing maintenance requirements over time.

In summary, the Craftsman 580.767451 is a feature-rich blower that combines power, flexibility, and ease of use. With its strong 27 cc engine, variable speed options, and vacuum functionality, it meets the demands of both casual users and more seasoned landscaping professionals. Its thoughtful design and reliable performance make it a valuable addition to any outdoor toolkit. Whether tackling seasonal yard work or preparing for special events, this blower provides the efficiency and power required to accomplish tasks with ease.
Top Page Image Contents