LightSpeed Technologies CAT 860 user manual Pagefirst Priority Mute, Audio Input, Audio Output

Page 15

5. Warranty, Safety

& Specifications

 

 

 

4. Troubleshooting

 

 

 

 

3. Optional

Accessories

11.USING THE REDMIKE TO AMPLIFY EXTERNAL AUDIO EQUIPMENT

The REDMIKE includes a 3.5mm audio input jack to connect to an audio source like a laptop or MP3 player. The REDMIKE will transmit the audio signal to be played through the system.

If your system includes two REDMIKEs, we recommend using Channel B (student mike) to amplify the external audio equipment so the teacher’s volume on the Channel A (teacher mike) does not have to be adjusted.

To determine which REDMIKE is set to Channel B, you can look at the switch on the back of the mike or speak into one of the mics and watch which set of LED’s glow on the front panel of the CAT 860 (A Volume or B Volume correspond to Channels A or B).

12. PAGEFIRST: PRIORITY MUTE

This optional feature interfaces with an independent classroom paging system. When the page is broadcast, all audio from the system is muted, ensuring important school-wide messages are never missed.

How it works:

1. PageFirst sensor clip is hung around the lead wires attached to the classroom paging speaker.

2. The clip is hard-wired to the CAT 860.

3. As a page is broadcast, the sensor clip detects the audio signal through induction and immediately mutes the CAT 860.

5. Warranty, Safety

& Specifications

4. Troubleshooting

3. Optional

Accessories

2. Setup & Use

 

 

1. Overview

1.Plug your external audio equipment (for example, laptop), into the input on the REDMIKE labeled “INPUT” using a 3.5mm patch cable.

AUDIO INPUT

4. When the page is over, the audio from the CAT 860 returns to normal volume level.

(For full installation details refer to the install sheet included with the optional PageFirst sensor clip)

2. Setup & Use

 

 

1. Overview

AUDIO

OUTPUT

2. Adjust the volume on the CAT

860 receiver which corresponds to selected mic channel A or B.

28

29

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CAT Table of Contents Table of Contents CONT’D Important Safety Instructions Standard Components Standard configuration of the CAT 860 will containSpeakers and Speaker Wire System Components and UnpackingOptional Components Optional ComponentsFront Panel Controls Optional equipment which may be part of your CAT 860 systemInfrared SENSOR/RECEIVER ISR Connections Rear Panel ControlsOverview Location of the Amplifier SET-UP & USEClip connects to t-bar on ceiling Release Bar IR SENSOR/RECEIVER ISR Installation5B. ISR Connection Installation of Amplifier WALL- Mount BracketSpeaker Installation 5A. Connect the Power SupplyOne Possible Set-up 5C. Speaker ConnectionsAudio Integration 5D. Audio Input ConnectionsSetup and Operation of Redmike Charging the RedmikeGreen Output to Personal Assistive Listening Device ALD Audio Equalization of the CATPagefirst Priority Mute Audio InputAudio Output Serial Interface Protocol RS-232 Data SignalsConnector Signal Wiring Command StructureProgramming CONT’D Summary of command and response transactionsSummary of command and response transactions Cont’d RS-232 Serial InterfaceControl Character Hex Value and Definition General Format for Query Command ExchangeBasic Command SET for Audio Switcher Operations Basic Command SET for Audio Switcher Operations CONT’DCMD 0xE4 Command Packet Uavs Mute AUDIO/VIDEO Sources CommandUN-MUTE Enabled AUDIO/VIDEO Source Command Mavs0xE8 Command Packet QEAV? Toggle Mute for Microphone Audio Inputs CommandQuery Enabled AUDIO/VIDEO Source Command TmmiQVMI? Query Absolute Volume AUDIO/VIDEO Source CommandQuery Absolute Volume Microphone Audio Input Command QVAV?QMMI? Query Mute for AUDIO/VIDEO Source CommandQuery Mute for Microphone Audio Inputs Command QMAV?AICH? Advanced Command SET for Audio Mixer OperationsAdvanced Command SET for Audio Mixer Operations CONT’D Query Selected Audio Input Command CMDParam #2 Param #1AIAV? SET Absolute Volume for Selected Audio Input CommandQuery Absolute Volume for Selected Audio Input Command 0x95 Command Packet Response PacketSelect Audio Output Command Query Selected Audio Output CommandAOCH? 0xA1 Command Packet SET Absolute Volume for Selected Audio Output Command 0xB1 Command Packet Audio Input Functions for the Infrared Source Group Cont’d IIAV? SET Absolute Volume for Selected Infrared Input CommandQuery Absolute Volume for Selected Infrared Input Command 0xB5 Command Packet Response PacketCOMPUTER, & AUX Mute Selected Audio Input CommandUN-MUTE Selected Audio Input Command Input Muting Functions Group Cont’dCMD Hex Param Value Definition Symbol Value Audio Input FunctionsSymbol Value 0xC0 Command Packet Response PacketAUDIO/MICROPHONE Input Power /MUTE ButtonHex Param Value Definition PingRedmike VC Charging LT-71 Charging Audio Input plug a laptop Power SwitchPOWER/CHARGE Indicator Channel Select SwitchRedmike Share Initial Set-up Initial SET-UP Optional IR Media ConnectorCommon Problems and Solutions Other Optional AccessoriesALL Problems Most Problems are related to low battery power Tips to Obtain Optimum Audio Performance FIVE-YEAR Limited WarrantyRisk of Electric Shock do not Open Safety Warnings and CertificationsOverall Specifications System SpecificationsLightspeed Technologies

CAT 860 specifications

LightSpeed Technologies has made significant strides in the field of educational technology with its innovative product, the CAT 860. This advanced audio distribution system is designed to enhance learning environments by ensuring that every student can hear their teacher clearly, regardless of classroom size or layout. The CAT 860 is particularly valuable in diverse educational settings, from traditional classrooms to modern digital learning environments.

One of the standout features of the CAT 860 is its powerful amplification capabilities. The system is equipped with a robust amplifier that delivers crystal-clear sound, offering a more engaging experience for students. This clarity not only enhances comprehension but also reduces fatigue during prolonged listening sessions. The CAT 860 uses digital signal processing to eliminate background noise and offers a full-range audio experience without distortion, which is critical in maintaining student attention.

Another key characteristic of the CAT 860 is its flexibility in terms of connectivity. It supports various input sources, including microphones, audio devices, and streaming services. This versatility makes it easier for teachers to incorporate multimedia resources into their lessons, fostering a more dynamic and interactive learning process. Moreover, the system can connect wirelessly to other devices, allowing for seamless integration into existing educational technology infrastructure.

Additionally, the CAT 860 is user-friendly, featuring a simple interface that allows teachers to quickly adjust volume levels and select audio sources without needing extensive technical training. This ease of use encourages teachers to utilize the system more frequently, which in turn maximizes the benefits of enhanced audio in the classroom.

In terms of design, the CAT 860 is compact and aesthetically pleasing, making it a suitable addition to any classroom environment. Its modern design ensures that it blends seamlessly with other teaching aids and equipment, maintaining an organized and professional appearance.

Overall, the LightSpeed Technologies CAT 860 is a powerful and flexible audio distribution system that caters to the unique needs of modern classrooms. By improving sound quality and ease of use, it enhances the overall educational experience for both students and teachers alike, making it an essential tool in today's learning environments.
Top Page Image Contents