LightSpeed Technologies CAT 860 user manual Redmike VC Charging

Page 37

5. Warranty, Safety

& Specifications

 

 

 

4. Troubleshooting

 

 

 

 

3. Optional

Accessories

 

 

 

2. Setup & Use

 

 

 

Overview

REDMIKE VC : Charging

Before use, the REDMIKE VC should be charged. See page 20 and follow the same instructions for the

REDMIKE.

REDMIKE VC : Initial Set-up

See page 17 and follow the same instructions for the REDMIKE to setup the REDMIKE VC.

NOTE: A nominal volume level must be set on the CAT 805iX before adjusting controls on the REDMIKE VC.

The teacher can now use the controls on the REDMIKE VC to adjust the volume level from anywhere in the room. The microphone volume control has 4 steps up and 4 steps down from the mid point (9 levels total).

OPTIONAL LT-71: Controls and Connections

4

 

 

1

 

 

 

5

LT-71

LT-71

2

63

3. Optional5. Warranty, Safety Overview2. Setup & Use4. Troubleshooting Accessories& Specifications

1.

1.ON/OFF/MUTE Switch

2.CHANNEL SELECT SWITCH (CH A/B): Use this to choose Channel A or B. If you are using a single microphone, we recommend using Channel A.

3.POWER/CHARGE INDICATOR: A BLUE light indicates the REDMIKE VC is on and fully charged. A RED light indicates a charge is needed.

4.EXTERNAL MICROPHONE INPUT (MIC): Use the 3.5mm MIC jack for the optional TK-250 headset microphone (part# MC- TK250LTM).

5.AUXILIARY (AUX): Plug a laptop, MP3 player or other audio source into this jack to wirelessly transmit the audio signal to be played through the system.

6.CHARGER INPUT (CHARGER): Plug the charging cable from the charger into this jack for daily charging. The LED on the front will glow RED to indicate charging.

1.

72

73

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CAT Table of Contents Table of Contents CONT’D Important Safety Instructions Speakers and Speaker Wire Standard configuration of the CAT 860 will containSystem Components and Unpacking Standard ComponentsFront Panel Controls Optional ComponentsOptional equipment which may be part of your CAT 860 system Optional ComponentsInfrared SENSOR/RECEIVER ISR Connections Rear Panel ControlsOverview Location of the Amplifier SET-UP & USEClip connects to t-bar on ceiling Release Bar IR SENSOR/RECEIVER ISR InstallationSpeaker Installation Installation of Amplifier WALL- Mount Bracket5A. Connect the Power Supply 5B. ISR ConnectionAudio Integration 5C. Speaker Connections5D. Audio Input Connections One Possible Set-upCharging the Redmike Setup and Operation of RedmikeGreen Output to Personal Assistive Listening Device ALD Audio Equalization of the CATAudio Input Pagefirst Priority MuteAudio Output Connector Signal Wiring RS-232 Data SignalsCommand Structure Serial Interface ProtocolSummary of command and response transactions Cont’d Summary of command and response transactionsRS-232 Serial Interface Programming CONT’DControl Character Hex Value and Definition General Format for Query Command ExchangeBasic Command SET for Audio Switcher Operations CONT’D Basic Command SET for Audio Switcher OperationsCMD 0xE4 Command Packet UN-MUTE Enabled AUDIO/VIDEO Source Command Mute AUDIO/VIDEO Sources CommandMavs Uavs0xE8 Command Packet Query Enabled AUDIO/VIDEO Source Command Toggle Mute for Microphone Audio Inputs CommandTmmi QEAV?Query Absolute Volume Microphone Audio Input Command Query Absolute Volume AUDIO/VIDEO Source CommandQVAV? QVMI?Query Mute for Microphone Audio Inputs Command Query Mute for AUDIO/VIDEO Source CommandQMAV? QMMI?Advanced Command SET for Audio Mixer Operations CONT’D Advanced Command SET for Audio Mixer OperationsQuery Selected Audio Input Command CMD AICH?Param #2 Param #1Query Absolute Volume for Selected Audio Input Command SET Absolute Volume for Selected Audio Input Command0x95 Command Packet Response Packet AIAV?Query Selected Audio Output Command Select Audio Output CommandAOCH? 0xA1 Command Packet SET Absolute Volume for Selected Audio Output Command 0xB1 Command Packet Audio Input Functions for the Infrared Source Group Cont’d Query Absolute Volume for Selected Infrared Input Command SET Absolute Volume for Selected Infrared Input Command0xB5 Command Packet Response Packet IIAV?UN-MUTE Selected Audio Input Command Mute Selected Audio Input CommandInput Muting Functions Group Cont’d COMPUTER, & AUXSymbol Value Symbol Value Audio Input Functions0xC0 Command Packet Response Packet CMD Hex Param Value DefinitionHex Param Value Definition Power /MUTE ButtonPing AUDIO/MICROPHONE InputRedmike VC Charging LT-71 Charging POWER/CHARGE Indicator Power SwitchChannel Select Switch Audio Input plug a laptopRedmike Share Initial Set-up Initial SET-UP Optional IR Media ConnectorOther Optional Accessories Common Problems and SolutionsALL Problems Most Problems are related to low battery power Tips to Obtain Optimum Audio Performance FIVE-YEAR Limited WarrantyRisk of Electric Shock do not Open Safety Warnings and CertificationsOverall Specifications System SpecificationsLightspeed Technologies

CAT 860 specifications

LightSpeed Technologies has made significant strides in the field of educational technology with its innovative product, the CAT 860. This advanced audio distribution system is designed to enhance learning environments by ensuring that every student can hear their teacher clearly, regardless of classroom size or layout. The CAT 860 is particularly valuable in diverse educational settings, from traditional classrooms to modern digital learning environments.

One of the standout features of the CAT 860 is its powerful amplification capabilities. The system is equipped with a robust amplifier that delivers crystal-clear sound, offering a more engaging experience for students. This clarity not only enhances comprehension but also reduces fatigue during prolonged listening sessions. The CAT 860 uses digital signal processing to eliminate background noise and offers a full-range audio experience without distortion, which is critical in maintaining student attention.

Another key characteristic of the CAT 860 is its flexibility in terms of connectivity. It supports various input sources, including microphones, audio devices, and streaming services. This versatility makes it easier for teachers to incorporate multimedia resources into their lessons, fostering a more dynamic and interactive learning process. Moreover, the system can connect wirelessly to other devices, allowing for seamless integration into existing educational technology infrastructure.

Additionally, the CAT 860 is user-friendly, featuring a simple interface that allows teachers to quickly adjust volume levels and select audio sources without needing extensive technical training. This ease of use encourages teachers to utilize the system more frequently, which in turn maximizes the benefits of enhanced audio in the classroom.

In terms of design, the CAT 860 is compact and aesthetically pleasing, making it a suitable addition to any classroom environment. Its modern design ensures that it blends seamlessly with other teaching aids and equipment, maintaining an organized and professional appearance.

Overall, the LightSpeed Technologies CAT 860 is a powerful and flexible audio distribution system that caters to the unique needs of modern classrooms. By improving sound quality and ease of use, it enhances the overall educational experience for both students and teachers alike, making it an essential tool in today's learning environments.
Top Page Image Contents